SMART ANDROID TV WITH DVB-T2/C/S2 Picture similar SRT 32HD5553, SRT 40FD5553 – HD SRT 43UD7553, SRT 50UD7553, SRT 55UD7553 – UHD Brugervejledning Brukerveiledning Gebruiksaanwijzing Användarhandbok Korisnički priručnik Ръководство на потребителя Посібник користувача 20/02/2023/15:14 Bedienungsanleitung Manuel d’utilisation Manuale utente Manual del usuario Manual do utilizador Használati útmutató Uživatelský manuál www.strong.
SERVICE CENTER AT support_at@strong.tv 0820 400 150 (€ 0,12/Min. österr. Festnetz) BG support_bg@strong.tv CZ support_cz@strong.tv +359 32 634451 844 44 44 90 support_de@strong.tv DE 0180 501 49 91 (€ 0,14/Min. deutsches Festnetz) (€ 0,42/Min. max. Mobilfunknetze) DK support_dk@strong.tv ES support_es@strong.tv HU support_fr@strong.tv HR +385 1 344 57 66 +36 1 445 26 10 support_it@strong.tv IT 199 404 032 Da rete fissa 24,8 cent. al min. 12,5 cent.
Licenses THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C.
20 Feb 2023 15:14 TABLE OF CONTENT 1. INSTRUCTION 3 1.1 Safety Instructions 1.2 Storage 1.3 Accessories 1.4 Equipment set-up 3 3 4 4 2. INSTALLATION 4 2.1 Password setting: 2.2 Front panel 2.3 Rear panel 2.4 Remote controls 2.5 Installing the batteries 2.6 Using the IR remote controls 4 4 5 7 10 10 3. FIRST TIME INSTALLATION 11 3.1 Channel installations for cable 3.2 Channel installations for Antenna 3.3 Channel installations for Satellite 13 15 16 4. HOME SCREEN 18 4.1 Inputs 4.
1. INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. Only use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). Please refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty. 1.3 Accessories 1x installation instructions 1x Safety Instructions/Warranty Cards 2x remote controls* 2x AA batteries 2x AAA batteries * It is possible to pair only the small Remote Control, however the second remote control can still be used in the traditional way without a Bluetooth connection as the first one. 1.4 Equipment set-up Fig.
NOTE: The graphics are for representation only. 1. Power indicator /remote sensor 2. Speakers 2.3 Rear panel Fig. 3a NOTE: The graphics are for representation only. 32FD5553 1. LAN Connect to your Internet router to access the internet/apps. 2. HDMI 2 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console. 3. ANTENNA IN 1 Connect a coaxial cable to receive signal from the DVB-T/T2 antenna or DVB-C cable. 4.
40FD5553 ANT1 COMMON INTERFACE (CI) DIGITAL AUDIO OUT ANT2 SATELLITE HDMI1(ARC/CEC) AV USB 2.0 (5V 500mA) 13/18V 400mA LAN HDMI3(CEC) HDMI2(CEC) (5V USB 2.0 500mA) 1. HDMI 1 (ARC) Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console or directly to a Digital Amplifier that supports the ARC function. This input is equipped with the ARC (Audio Return Channel) feature to implement audio connections and for a full Dolby Audio support. 2.
4. S/PDIF (optical) Use an optical cable to connect your TV to a compatible digital amplifier or Home theatre set. 5. CI Insert a Conditional Access Module (CAM). 6. Mini AV IN To connect your video camera or other device using 3.5 mm AV cable to your TV to play videos on your TV screen. 7. USB 2.0 USB 2.0 port. 8. HEADPHONE Headphone or Earphone audio output, speakers will be muted when earphone is plugged in and headphone selected. 9.
Fig. 4a 1 2 4 3 5 6 7 8 9 10 11 12 13 1. q Press to turn the TV on or standby. 2. ! Press to mute or restore the volume. 3. Navigate the menu. 4. OK Confirm the selection. 5. Press to go back to previously viewed channel. In menu: Back to previous menu. Enter the home desktop. 6. Press to access the TV settings. 7. 8. NETFLIX Press for direct access to Netflix* 9. YouTube Press for direct access to YouTube. 10. prime video Press for direct access to prime video**. 11.
Fig. 4b 1 2 3 4 5 6 7 11 10 8 9 12 13 14 15 17 16 19 18 21 20 25 24 28 30 32 22 23 26 27 29 31 Second RCU is quite big and traditional. It is only IR and has complete list of buttons to control your TV. 1. q Press to turn the TV on or standby. 2. ! Press to mute or restore the volume. 3. 0 ~ 9 Choose channel directly. 4. INFO Display information about the current source. Press to display EPG info in TV mode. 5. Press to access the TV settings. 6. 7.
17. Press to display the apps list. Press to access the TV sources. 18. 19. P +/- Change programmes up or down. 20. Press to access the teletext in TV mode. 21. USB Enter the Multimedia menu. Audio track selection 22. 23. SUBT Enable/disable subtitles in DTV mode 24. 1 Press to start playback. 25. 2 Press to pause playback. 26. 3 Press to stop playback. 27. 4 No function. 28. 5 Press to fast reverse. 29. 6 Press to fast forward. 30. 7 Press to play the previous file. 31.
• Use the remote control by pointing it towards the remote sensor. Items between the remote control and the remote sensor could block normal operation. • Do not cause the remote control to vibrate violently. Also, do not splash liquid on the remote control or put the remote control in a high humidity place. • Do not place the remote control under direct sunlight which will cause deformation of the unit by heat.
Note: I f you plan to use smaller RCU for TV control, we recommend to make pairing of it with your TV. This will allow using extended features of it. Pairing screen appear after the country and language selection during the First Time Installation. Follow simple on-screen instructions for this. If you miss this screen, it is possible to make pairing later in Settings chapter of menu or by pressing key on RCU at first time of it usage.
Step 6 Tuner Mode Please select your tuner mode: Antenna Cable Satellite To install channels for terrestrial, satellite or cable broadcasting please select Antenna, Cable or Satellite and choose required type of channels Digital, Analogue. 3.1 Channel installations for cable Tuner Mode Please select your tuner mode: Antenna Cable Satellite Select the tuner mode Cable and press OK to continue.
Channel scan First, please connect the cable. Star the channel scan now? If you skip this step, the channel scan could be performed in Menu. Digital and analog channels Only analogue channels Only digital channels Skip scan First step is to connect the cable. Then you must start the channel scan. You can choose between digital and analogue channels, only analogue channels or only digital channels. If you skip this step, the channel scan can be done later by accessing the TV menu.
3.2 Channel installations for Antenna Tuner Mode Please select your tuner mode: Antenna Cable Satellite Select the tuner mode Antenna and press OK to continue. Scan direc on Select the channel ordering method. Automa c channel ordering is the default method. Pay TV ordering enable user presenta on of channel numbers in a convenient form dedicated to Pay TV customers. Use Automa c channel ordering in case Pay TV ordering fails to install channels.
In the next step, the channel search is started and takes a few minutes. Scanning The channel scan may take a while to complete. Analog Channels: 0 Digital Channels: 0 Progress: 7% 3.3 Channel installations for Satellite Tuner Mode Please select your tuner mode: Antenna Cable Satellite Select the tuner mode Satellite and press OK to continue. Satellite installa on Do you want to start satellite channel installa on? Press OK to start with the satellite channel installation.
Antenna type Next More By selecting Next you go to the Select the Operator page, while by selecting More you access the Satellite antenna type page if it is necessary to set the DiSEqC or Unicable. Satellite antenna type Single Tone Burst DiSEqC 1.0 DiSEqC 1.1 DiSEqC 1.2 Unicable I If you are looking for the LNB list you have to go to General and press OK.
With you can select the satellite (or satellites) to which your dish is addressed. Press OK to access the submenu that allows you to activate or deactivate the selected satellite and to set its various parameters. After all settings have been made, select 8 to continue. NOTE: To configure the DiSEqC or Unicable parameters it is necessary to select MORE in the previous steps. Channel scan First, please connect the cable.
Search movies, TV, and more 1 6:28 Apps YouTube Customise channels To access Ho me screen and exit from any active application, press button on the remote control unit (RCU). Use and to move around and OK to enter the option or application. 4.1 Inputs TV has such possible inputs or sources: ATV, ANTENNA, CABLE or SATELLITE for respective live TV installed channels preview or HDMI 1, HDMI 2, HDMI 3 and AV to select connection from external devices.
Search Home Discover Apps Network & Internet Network privacy policy Wi-Fi Available networks XXXX Connected 12345 Your TV can be connected to your home network in two ways: • Wired, using the RJ-45 (LAN) connector on the back panel. • Wireless, using the internal wireless and your home wireless network. NOTE: To access the Internet, you must subscribe to a highspeed broadband Internet service with your Internet service provider.
To connect to a wired network 1. Ensure you have: - An Ethernet cable long enough to reach your TV - A router or modem with an available Ethernet port - A highspeed Internet connection 2. Connect your Ethernet cable to the router and to the Ethernet port on the back of the TV. 3. Use the Network Configuration menu to configure the TV. Connecting to a wireless network Fig. 6b NOTE: The graphics are for representation only. To connect to a wireless network: 1. Ensure you have: - A router broadcasting a 2.
5.1 Channel installation If the channels were not tuned during the first installation, it is still possible to do so later, by accessing the LIVE TV application available on the HOME screen. First of all you need to select the correct source to scan to get the channels you intend to install by pressing the button and selecting a source. Input Antenna Cable Satellite ATV Android TV Home Once set the correct source press then button to get to Channels chapter.
EPG stands for Digital Electronic Program Guide. It is supplied by the programme providers and offers information about broadcasted programmes. You can access it in digital mode by pressing on the remote control or through TV options with + button in Channels chapter. Select Program Guide icon to get into EPG. Use to select channel and to see detailed information for program. Press to stop and return to viewing modes.
- 2nd TV options level TV options contains such items: Input, Picture, Sound, Power, CI Card, Advanced Options and Settings. TV op ons Inputs Picture Sound Inputs allows you to select the source to be displayed. The available sources are: - Antenna: to enable the display of channels from the digital terrestrial signal. - Cable: to enable viewing of channels from the cable signal. - Satellite: to enable viewing of channels from satellite signal.
NOTE: Using of smart functionality of your TV require connection to internet and, in most cases, using your Google account. Please refer to Chapter 3 and Chapter 7 for information how to setup internet connection and enter to Google account. Using Google account give you access to applications and games, movie and music market of Google Play Store.
Timer Gives the possibility to set the TV On or Off. Language Display various languages list to set menu language for you TV. Use to select required language and press OK to confirm. Keyboard Set graphical on-screen keyboard parameters. Inputs In this menu it is possible to manage the TV inputs, assigning a specific name or activating the CEC function to activate peripheral control via HDMI connection. Power Allows you to manage the automatic shutdown of the TV.
Search Home Discover Apps With Smart Player you can reproduce video, audio or picture files of supported formats from your USB storage devices on your TV screen. Note: I f, for any reason, you do not want to use built-in Smart Player application, you could enter to Google Play Store and install any of available media players (i.e. MX Player, VLC Player, etc.). Note: S upport (or non-support) of Multimedia files depend not only on your TV, but also on application, which will be used for playback.
8.2.1 Play videos Select Video from Multimedia type selection and choose file for playback. 007-Skyfall 00:03 OK Pause FB FF Menu Playlist 00:46 Additional useful keys: OK to play or pause the playback. for rewind backward/forward the file. to access the Menu. to display the other video files present in the directory. INFO button to get more information about the file.
8.2.2 Browse photos Select Photo from Multimedia type selection and choose the file from which the slideshow has to start the playback. Press Firenze 1 (4204x2797).jpg experience more content 16/64 i To get access to control playback during playback press OK button to display the menu or button to display more content.
8.2.4 Browse files Select Device from Multimedia type selection and choose folder to enter or file for playback. Press Device Video STRONG HDD NOTE: Picture to open menu Music SD Card • This menu shows only supported by Smart Player files. • Files with other file extensions may not be displayed, even if they are saved on the same USB storage device. 9.
Problem Unorderly ripples on the picture Possible cause and solution It is usually caused by local interference, such as cars, daylight lamps and hair driers. Adjust the antenna to minimize the interference. Snowy dots, blocking and interference If the antenna is located in the fringe area of a television signal where the signal is weak, the picture may be marred by dots, show blocking or break-ups.
10.
Net-weight: 32”: 3.7 Kg 40”: 5.8 kg 43”: 7 Kg 50”: 9.1 Kg 55”: 12.2 Kg Data Protection: Please be aware that STRONG, its manufacturing partners, the application providers and the providers of the services may collect and use technical data and related information, including but not limited to technical information about this device, system and application software and peripherals.
