VIDAA SMART TV 24'' (60CM) SRT24HE4203 Bedienungsanleitung Manuel d’utilisation Manuale utente Manual del usuario Manual do utilizador Használati útmutató Uživatelský manuál Brugervejledning Brukerveiledning Gebruiksaanwijzing Användarhandbok Korisnički priručnik Ръководство на потребителя Посібник користувача www.strong.
SERVICE CENTER AT support_at@strong.tv 0820 400 150 (€ 0,12/Min. österr. Festnetz) BG support_bg@strong.tv CZ support_cz@strong.tv +359 32 634451 844 44 44 90 support_de@strong.tv DE 0180 501 49 91 (€ 0,14/Min. deutsches Festnetz) (€ 0,42/Min. max. Mobilfunknetze) DK support_dk@strong.tv ES support_es@strong.tv HU support_fr@strong.tv HR +385 1 344 57 66 +36 1 445 26 10 support_it@strong.tv IT 199 404 032 Da rete fissa 24,8 cent. al min. 12,5 cent.
Licenses THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NONCOMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NON-COMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM
TABLE OF CONTENT 1. INSTRUCTION 2 1.1 Safety Instructions 1.2 Storage 1.3 Accessories 1.4 Equipment set-up 2 3 3 3 2. INSTALLATION 4 2.1 Default PIN code: 1234 2.2 Front panel 2.3 Rear panel 2.4 Remote control 2.5 Installing the batteries 2.6 Using the remote control 4 4 4 5 6 6 3. FIRST TIME INSTALLATION 7 3.1 Home 3.2 Input 7 7 4. PICTURE 8 4.1 Picture Mode 4.2 Aspect Ratio 4.3 Apply Picture Settings 8 8 9 5. SOUND 11 5.1 Sound Mode 5.2 Headphone 5.3 Sound Mode Settings 11 11 12 6.
1. INSTRUCTION 1.1 Safety Instructions Read all of the instructions before operating the set. Keep these instructions well for later use. O nly use attachments/accessories specified or provided by the manufacturer (such as the exclusive supply adapter, battery etc.). P lease refer to the information on the exterior back enclosure for electrical and safety information before installing or operating the apparatus.
1.2 Storage Your device has been carefully checked and packed before shipping. When unpacking it, make sure that all the parts are included and keep the packaging away from children. We recommend that you keep the carton during the warranty period, to keep your device perfectly protected in the event of repair or warranty. 1.3 Accessories 1x installation instructions 1x Safety Instructions/Warranty Cards 1x remote controls* 2x AAA batteries 1.4 Equipment set-up Fig.
2. INSTALLATION 2.1 Default PIN code: 1234 2.2 Front panel Fig. 2 NOTE: The graphics are for representation only. 1. Power indicator /remote sensor 2. Speakers Turns the TV on or in standby. 3. q / 2.3 Rear panel HDMI3 HDMI2 RJ45 HDMI1 (ARC/CEC) USB2 USB1 S/PDIF(COAX.) VIDEO L-AUDIO IN-R COMMON INTERFACE (CI) HEADPHONES SAT IN ANT/CABLE IN Fig. 3 1. HDMI 3 Connect HDMI input signal from a signal source such as DVD, Blu-ray player or game console. 2.
9. S/PDIF (optical) Use an optical cable to connect your TV to a compatible digital amplifier or Home theatre set. 10. AUDIO L/R Audio Left/Right IN. Use RCA Male (Plug) to RCA Male (Plug) to connect your TV at home theatre. 11. VIDEO Video IN. Use RCA Male (Plug) to RCA Male (Plug) to connect your TV with home theatre, s-video VCRs, camcorders or DVD players. 12. SAT IN Connect a coaxial cable to receive signal from the Dish LNB. 13.
15. ! Press to mute or restore the volume. 16. CH +/Change programmes up or down. 17. TEXT Press to enter or exit the teletext menu. 18. SUBTITLE Enable/disable subtitles in DTV mode. 19. INFO Display information about the current source. 20. VIDAA free Open free videos to watch from VIDAA server. 21. Custom button - Short press, short cut key to lance the selected application. - Long press, call the edit Launcher screen to select application. 22. deezer Press for direct access to deezer*. 23.
3. FIRST TIME INSTALLATION After all connections have been made properly, switch your TV on. Please follow the initial installation procedure on your screen and complete the installation. It will take a few minutes. 3.1 Home When you have finished the first-time setup, you can enter the Press the button to select the to select. screen. screen. On the remote control you can press Inputs: When you click on this icon you can select an input source.
Now press OK to enter the setting. Picture Sound Network Channel Accessibility System Support 4. PICTURE Press to enter the main menu press to select the picture menu. 1. Press to select the option that you want to adjust in the PICTURE menu. 2. Press OK to adjust. 3. After you have finished your adjustment, press OK to save the and return to the previous menu.
Picture Mode Settings Press to select,and press and OK to enter. Picture Mode Se ngs Apply Picture Se ngs Adjust current picture mode to apply to all sources or just current source. Current Sources Backlight Brightness 50 Contrast 50 4.3 Apply Picture Settings In this menu, you can adjust current picture mode to apply to all sources or just current source. Press to select, and press and OK to enter.
Expert Se ngs Adjust the Hue, Satura on and Brightness of colour se ngs. Colour Tuner White Balance Black Level Auto Gama adjustment 22 Colour Tuner Adjust the Hue, saturation, and brightness of the colour settings. Press [UP/DOWN] to select {Colour Tuner}. Press button to enter the {sub-menu} and adjust. White Balance Adjust the intensity of red, green and bule lights to view the true colours of all images in the picture. Press to select White Balance. Press to enter and adjust.
Reset Current Mode The current picture se ngs will revert back to the factory default se ngs. Do you want to con nue? 5. SOUND Press button to display the main menu. Press to select Sound in the main menu. Sound Sound Mode Select a preset sound mode to suit the type of content you are listening to. Standard Headphone Sound Mode Se ngs Speakers 1. Press to select the option that you want to adjust in the Sound menu. 2. Press OK to adjust. 3.
5.3 Sound Mode Settings Press to select Sound Mode Settings. Press to enter sub-menu. Sound Mode Se ngs Apply Audio Se ngs Adjust current sound mode to apply to all sources or just the current sources. Current sources Bass Boost Surround Sound Dialog Clarity TruVolume Apply Audio Settings Adjust the Curren sound mode to apply to all source or just current source. Press to select, then press and OK to select Current Source/All Sources.
Audio Output Press to select Audio Output and enter, then press to select ARC/TV Speaker/SPDIF Only. Digital Audio Output Press button to select Digital Audio Out, then press to select. Digital Audio Delay Press to select Digital Audio Delay, then press to adjust. Lip Sync Press to select,then press to adjust. Balanced left and right channels. Press to select Balance. Press to adjust. 6.
7. CHANNEL Press button to display the main menu. to select Channel. Channel Auto Scan Automa c channel scan Channel Edit Advanced Se ngs 1. Press to select the option that you want to adjust in the Channel menu. 2. Press OK to adjust. 3. After finishing your adjustment. Press OK to save and return to the previous menu. Auto Scan Automatic search can search for effective program channel automatically. Press to select Auto Scan, then press OK to setup.
Operator Press to select and press to setup. Operator Auto Channel Scan Vodafone (NRW, Hessen, BW) Pyur Standard Mode setup Press to select Mode setup and press to select Channel/Scan Mode/LCN.
Channel Edit Press to select Channel Edit. Channel Management Analogue Edit Antenna Edit Cable Edit ASTRAI 19.2°E Edit FAV1 Edit FAV2 Edit Advanced Settings Press to select Advanced Settings and then press OK / to enter. Advanced Se ngs Manual Scan Perform manual channel scan for ATV and DTV Channel List Auto Update Programme Guide Auto... Cl+ Module Se ngs Manual Scan Press to select Manual Scan and then press OK to enter. Press to select DTV Manual Scan/ATV Manual Scan.
ATV Manual Scan Press to select ATV Manual Scan and then press OK to enter. ATV Manual Scan 110 Frequency MHz Picture System Auto Sound System B/G Start Channel List Auto-Update Press to select Channel List Auto-Update, then press to select On/Off. Programme Guide Auto Update Press to select Programme Auto Update. ne Guide Auto Update amme Guide Auto Update Channel Selec on TV will automa cally update the Programme Guide data overnight white in stand-by mode.
CI+ Module Settings Press to select CI+ Module Settings and you can review the advanced settings menu. Accessibility Press to select Accessibility, then press OK to enter. Accessibility Menu Scheme Dark High Contrast Menu Menu Transparency Medium Hard of hearing Sub tles Audio Type Dialogue Enhancement Menu Scheme Press to select Menu Scheme, then press to choose Dark/Light. High Contrast Menu Press to select High Contrast Menu, then press to select On/Off.
8. SYSTEM Press the button to display the main menu. Press to select System in the main menu. System Time Timer Se ngs System PIN Parental Control Language and Loca on Amazon Alexa Service Applica on Se ngs HDMI & CEC 1. Press to select the option that you want to adjust in the System menu. 2. Press OK to adjust. 3. After finishing your adjustment, press OK to save and return to the previous menu. Time Press to select Time. Time Time Format Set the me display to be 12 or 24-hour format.
Timer Settings Press to select Timer Settings. Timer Se ngs Sleep Timer Set the sleep mer to automa cally turn the TV off at the specified me. Off Power On Timer Power Off Timer Menu Time-Out 60’s Auto sleep Off Auto standby with no signal 15 minutes Sleep Timer Press to select Sleep Timer. (Optional: Off/15/30/60/90/120 Minutes/User Defined) Power On Timer Press to select Power On Timer.
Menu Timeout Press to select Menu Timeout. (Optional: Off/10s/20s/30s/60s/5min) Auto Sleep Press to select Auto Sleep. (Optional: Off/3H/4H) Auto Standby with No Signal Press to select Auto Standby with No Signal. (Optional: Off/15 Minutes) System PIN Press button to select System PIN. Change your PIN that you use to access Parental Controls,Auto Channel Scan and Reset to Factory Defaults. Parental Control Press to select Parental Control.
Digital Teletext Press to select Digital Teletext. (Optional: WEST EUR/EAST EUR/Russian/Aarabic/Persian/Greek) Amazon Alexa Service Press to select Amazon Alexa Service and press to enter sub-menu and setup. Amazon Alexa Service Turn on and off Alexa Service. Amazon Alexa Service Amazon Alexa Service Setup Setup chekclist Things to try Application Settings Press to select Application Settings. Applica on Se ngs Stream video, music or any other content from another device to yout TV screen.
Prime Video Press to select Prime Video, and press OK / to select. Netflix Press to select Netflix, and press OK / to select. HDMI&CEC Press to select HDMI & CEC, then press Enter button to enter sub-menu to select. Press to select CEC Control/Device Auto Power Off /Device Auto Power On/ TV Auto Power On/CEC Device Lists. HDMI & CEC Allow HDMI devices to control each other.
Advanced Settings Press to select Advanced Settings, then press OK / to enter. Advanced Se ngs TV Name Choose a name for your TV. The name will be shown to devices that are available for sharing data. Smart TV Power Indicator Screensaver 10 Minutes Input Labels Noficaons Enhanced Viewing Setup Wizard Fast Power On TV Name Press to select TV Name, then press OK / to setup your TV name. Power Indicatior Press to select Power Indicatior, then press to select Off/On.
Support Press to select Support, then press OK / to enter. Support View system informa on. System Info Self Diagnosis E-Manual System Update Disclaimer and Privacy Mobile App Download Reset to Factory Default System Info View System information Press to select System Info, then press OK / to enter sub-menu. Self Diagnosis Perform self-diagnosis to test sound, picture and connections. Press to select Self Diagnosis, then press OK / to enter sub-menu.
Channel List Press to select Channel List, then press OK to enter sub-menu. Antenna 1 DT29 1080i No programme 2 DT29 576i No programme 3 DT29 576p No programme 4 DT2-46_1080i No programme Press to add FAV or Home Subtitle Press to select Subtitle, then press to select Off/On. Audio Only Press to select Audio Only. Press OK to enter the sub-menu. Settings Press to select Settings. Press OK to enter the sub-menu.
9. MEDIA To use this function, you must have inserted in the USB port an USB device loaded with your multimedia files. Press INPUT and then OK to select USB to access your media. KINGSTON Search file Grid All media Name KINGSTON/ Press Menu to create list Video Press to select Video or All, and press to select Movies. Press options on the left side. button to display the setting Menu Zoom Mode Press to select Zoom Mode, and press OK to select.
Press to select Information, and press OK to view. Play List Press to select Play List, and press OK to display all available videos. Audio Only Press to select Audio Only, and press OK to select. Audio Press to select Audio or All, and press button to select Music. Information 3/3 Menu 00: 03: 52 Music1.mp3 04: 13 Music2.mp3 04: 09 Music3.mp3 03: 52 Press to select Information, and press OK to view.
Press to select Zoom Mode and press OK to select. Optional: Fit/Original Size Repeat Mode Press to select Repeat Mode and press OK to select. Optional: No Repeat/Repeat All Interval Press to select Ineterval and press OK to select. (Optional:5S/10S/20S) Information Press to select Information, and press OK to view. Play List Press to select Play List, and press OK to display all available Picture. 10.
Problem Radio frequency interference Possible cause and solution This interference produces moving ripples or diagonal streaks, and in some case, loss of contrast in the picture. Find out and remove the radio interference source. Playback of video is causing picture Read/write speed of your USB device could be too low. Make sure to freeze/macro blocks or similar use a USB storage device with sufficient speed and space.
1x CI 3x HDMI 2x USB 2.0 1x LAN (RJ-45) 1x S/PDIF (coaxial) 1x HEADPHONE 1x AV IN General Data Operating voltage: Power consumption: Power consumption in standby: Operating temperature: Storage temperature: Operating humidity: Storage humidity: Dimensions (WxDxH) in mm: Net-weight: 100 ~ 240 V AC 50/60 Hz 28 W, typ. 40W ≤ 0.5 W +5 °C ~ +25 °C -15 °C ~ +45 °C 20% ~ 80% RH, non-condensing 10% ~ 90% RH, non-condensing 550.7 x 171 x 367.3 (with stand) 2.
