Manual

13
successfully update a message appears on screen. Power o by removing the main power connector. Remove
USB device and power ON.
NOTE: NEVER disconnect the USB device from the TV, the TV from the main or switch OFF power during the update
procedure. It can damage your device and warranty will void!
5.7.1 HDMI CEC
HDMI_CEC Select this item and Press ENTER. Press t u to turn the HDMI CEC control On or O
ARC Press t u to turn the Audio Return Channel On or O.
Auto Standby Press t u to turn on this feature. When nished turn o your TV. The connected device will turn o automatically.
Auto Power On Press t u to select this option. When you switch On connected device it will turn on the Tv
automatically.
Device List Press ENTER to open the main menu of connected HDMI device(s).
6.0 MEDIA
1. Some USB storage devices may not be compatible to operate smoothly with this TV.
2. Back up all of the data in the USB storage device in case data is lost due to an unexpected accident. STRONG does not
assume any liability for the losses by misuse or malfunction. Data backup is consumer's responsibility.
3. For large le sizes, the loading speed may be slightly longer.
4. The recognition speed of a USB storage device may depend on each device.
5. When connecting or disconnecting the USB storage device, make sure the TV is not in USB mode otherwise the USB
storage device or the les stored in it may be damaged.
6. Please use only a USB storage device which is formatted in FAT32, NTFS (playback only) le system provided with
the Windows operating system. In case of a storage device formatted as a dierent utility programme which is not
supported by Windows, it may not be recognized.
7. For Software Updates and Database functions it is recommended to use USB-Sticks (keys) in FAT32.
8. When using a USB Hard Disk Drive which is not powered independently, ensure its power does not exceed 500 mA.
Otherwise the TV system will change into standby mode, and you must pull out the USB Hard Disk and restart the TV
system.
9. An “Unsupported File” message will be displayed if the le format is unsupported or the le is corrupted.
10. FHD big picture needs longer time to process, which is not caused by the TV. Please be patient.
11. This TV may not support some multimedia les changed and upgraded as the change of the encoding format or other
technical aspects advances.
12. Please refer to chapter 9. Appendix for a list of supported le formats for USB playback.
6.1 USB MENU
Press SOURCE and select Media or press DMP button.. You can view movie, music, photo and text les from your USB storage
devices. Connect a USB storage device to the USB input terminal and select the types of media on the home page: Movie, Music,
Photo and text. Press ENTER, the screen will show the connected USB device, press ENTER again to view the le folders and les.
Press pq or tu to select a folder, press ENTER to open the folder and select the les. Highlight the one you want to play or
watch or press directly u2 to start playing directly. Press 3 to stop playing and return to upper lever folder. Continuously press
EXIT to go back to upper level folder. Repeat again to select and play another media type.
NOTE: By choosing one of the three media types, for example Movie, the folders inside will display only video les and no
other formats.
6.2 PLAY MUSIC
During playback, press INFO or ENTER to display/exit the menu bar. Press the USB control buttons on the remote control to do
relevant operations.
Play & Pause/Stop/Prev./Next
Press u2 to play or pause the playback. Press 3 to stop playing. Press 7 8 to play the previous or the next
video le. Press INFO and use tu to highlight the corresponding icon on the control bar, then press ENTER.
The TV will response accordingly.
Fast Reverse/Fast Forward
Press and hold 5 6 for seconds to draw the playing progress as your desire, then press u2 to start the
playing from the new position.
Play Mode Highlight the corresponding icon and pressENTER to switch to another play mode.