4K Ultra HD Android TV Box Pi ctu re s im ila r SRT202EMATIC User Manual
Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna Austria Email: support_at@strong.
TABLE OF CONTENTS 1.0 INTRODUCTION 1.1 Safety Instructions 1.2 Equipment Set-up 1.3 Package content 1.4 Usage of external USB devices 2.0 TV BOX PANELS 2.1 Front Panel 2.2 Rear Panel 2.3 Remote control 2.4 Installing the batteries 3.0 CONNECTION GUIDE 4.0 SETTING UP YOUR DEVICE 5.0 SETTINGS 6.0 DOWNLOADING APPS 7.0 USE YOUR SMARTPHONE AS REMOTE 8.0 GOOGLE CAST 9.0 GOOGLE ASSISTANT 10.0 SIMPLE TROUBLESHOOTING 11.
1.0 INTRODUCTION Thank you for choosing the 4K Ultra HD Android TV Box supplied by STRONG. It has been produced with the latest new technology and offers extensive entertainment and great versatility. We wish you many hours of new great experiences exploring the Android world! 1.1 Safety Instructions Read all of the instructions before operating the device. Keep these instructions well for later use.
When you are connecting cables, be sure that the device is disconnected from the mains supply voltage. Wait a few seconds after switching off the device before you move the device or disconnect any equipment. It is a necessity that you only use an approved extension and compatible wiring that is suitable for the electrical power consumption of the installed equipment.
WARNING: The batteries should not be recharged, disassembled, electrically shortcircuited, be mixed or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used (e.g. NiMH), we recommend using types with low self-discharge to ensure long time operation of your remote control. 1.4 Usage of external USB devices It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible to USB 2.
2.2 Rear Panel 1 1. 2. 3. 4. 5. Fig. 2 2 3 4 2.3 Remote control Fig. 3 1. 2. 3. 4. 5. 6. 7. 8. 9.
2.4 Installing the batteries Fig. 4 Open the cover on the remote control and insert 2x AAA batteries into the compartment. The correct position of batteries polar diagram is shown inside the batteries compartment. 1. Open the cover. 2. Insert the batteries. 3. Close the lid. WARNING: The batteries should not be recharged, disassembled, electrically shortcircuited, be mixed or used with other types of batteries. 3.
NOTE: The SRT202EMATIC box also supports Wi-Fi. To connect, go to Settings -> Network. 1. Connect the SRT202EMATIC box to your television via the HDMI Cable. 2. Using an Ethernet Cable, connect the LAN Port of the TV Box to the LAN Port of your router or home broadband network. 3. Connect the TV Box to power using the power adapter provided. You can then power on your device and begin. NOTE: Before turning on your device, please switch the signal output of the TV to the correct source 4.
STEP 1: Language Select your preferred language on the Welcome Page. Welcome English Afrikaans Bahasa Melayu Català Češ na Dansk STEP 2: Set up with Android device Choose whether to set up your TV with an Android device or skip this step. If you choose Yes, please refer to the Bluetooth pairing section of this guide. Step 3: Wi-Fi Connect to your Wi-Fi Network. Skip this step if already connected via Ethernet. Step 4: Google Account Sign in with your Google Account.
Meet your Google Assistant Con nue Step 9: Name your Android TV Box Select from the options provided or enter a custom name to identify your device when pairing to other devices. Step 10: Get Started with Apps Select apps you would like installed. STEP 11: Welcome to Android TV A walkthrough of the features of your device Chromecast Built-in Stream your favourite entertainment from your phone, tablet, or laptop right to your TV. DONE Click on DONE after the walkthrough to start using your device.
5.0 SETTINGS Select Settings to check the device information, add/remove accounts and make changes to the system settings. Wi-Fi Settings Under Network Settings, select and enable Wi-Fi in order to connect to the network. Once the device scans and lists nearby Wi-Fi networks, select the appropriate network name, if required put in the password and select Connect. Language Settings Under Settings > Preferences, select Language to change the language previously set.
Adding Accounts For new Google users: sign up for a new Google account using the TV for easier login and payment security. Add an account or switch accounts under Accounts in the Settings Menu. Accounts Google your_email@gmail.com Add account Factory Reset Under Settings, select Storage & Reset. Click Factory data reset to erase everything. Once this option has been selected, all manually installed apps and user data information will be deleted.
About You can check information about your device by clicking on [ABOUT] in the Settings Menu. This panel will show you the model of your device, version, firmware version and more. You can also update your system by clicking on System update from this menu. Your system is up to date. Last successful check for update at 1:00 PM. Check for update 6.0 DOWNLOADING APPS All apps are available for download on the Google Play Store. Do not install apps via USB drive, Micro SD card or hard drive.
7.0 USE YOUR SMARTPHONE AS REMOTE Did you know that you can use your smartphone as touchpad to easily navigate your screen, instead of using the remote control buttons? You can even use your smartphone to type in that long movie title you want to search! How? 1. Simply download the Android TV Remote app from the Googe Play Store or the App Store on your respective Android or Apple device. (Make sure your phone and the box are connected on the same Wi-Fi network) 2.
Control Playback: Pause. Stop. Resume Volume: Louder. Softer. Power: Turn off. Play music, news, or podcasts Music: Play music by Sia. (Learn how to choose your music service provider.) News: Play the news.
10.0 SIMPLE TROUBLESHOOTING Issue Possible Reason Solution No display after power on The power cord is not properly connected Make Sure the device is connected to the power No Sound Audio cable is not connected. The device is on Mute or the volume is too low. Reconnect the cable. Failed to connect to network Ethernet cable is not properly connected. Wi-Fi is turned off or the signal is too weak. Reconnect the cable. Restart the Wi-Fi or adjust the position of the device closer to the router.
11.0 TECHNICAL SPECIFICATIONS Video decoder Aspect ratio: Video resolution: Auto/Full screen H.265 10-bit 4K*2K@60fps, VP9 4K*2K @60fps, H.264 Audio decoder Audio decoding: Audio mode: Dolby® Digital/ Dolby® Digital Plus*, MPEG1/2/4 Mono, L/R, Stereo *Dolby Digital Plus, Dolby Digital and the double-D symbol are registered trademarks of Dolby Laboratories Connectors Micro SD 2x USB 2.0 ports AV ETHERNET HDMI S/PDIF (optical) DC IN (5 V, 2 A) General data Wi-Fi: IEEE 802.11b/g/n, 2.4 GHz IEEE 802.
