Picture similar Prijemnik za Digitalnu Zemaljsku Televiziju u HD Rezoluciji SRT 8200 Uputstvo za upotrebu User manual 400 kanala Ručno/ Auto. TV Info Pretraživanje 4 favorit liste Digitalni zvuk 30 Tajmera Natpisi MP3/JPG MPEG 0.
22 Jun 2012 20:08 2 2 2 2 3 3 3 3 3 4 4 5 5 5 5 5 5 5 5 6 6 6 7 7 7 8 8 8 9 9 9 10 11 13 15 16 18 19 STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EC and 73/23/EC, RoHS 2002/95/EC Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change. All other product names are trademarks or registered trademarks of their respective owners.
1.0 INTRODUCTION 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIVER In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
Note: Indicates any other additional important or helpful information. MENU (Bold Characters) Move to (Italic Characters) Represents a button on the remote control or the receiver. Represents a menu item within a window. 1.4 Accessories Receiver - 1 pc. User Manual - 1 pc. English Remote control - 1 pc. Batteries (AAA) - 2 pcs. Warning: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed or used with other types of batteries.
2.3 Remote control 1. 2. 3. q ! 0-9 4. 5. 6. 7. 8. AV TV/R MENU EXIT p/q 9. t/u 10. OK 11. 12. 13. 14. 15. 16. EPG V+/VFAV AUDIO ZOOM 17. P+/P18. RED/V.F 19. GREEN/TEXT 20. YELLOW/SUB 21. BLUE/RCL 22. 2 23. 24. 25. 26. 27. : " 4 1 5 28. 6 29. 3 Fig. 3 To switch the receiver between standby and working mode To disable/enable the audio outputs of the receiver.
Warning: The batteries should not be recharged, disassembled, electrically short-circuited, be mixed or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote control. 2.5 Using the remote control Fig. 5 NOTE: English To use the remote control, point it towards the front of your receiver.
4.0 Starting up for the first time Ensure that your connections are properly setup. In case of difficulties or questions, please ask your local dealer or service for assistance. It is recommended to follow the Installation Guide step by step. It will guide you through the basic installation and channel searching process. It will enable you to enjoy digital HD broadcasts just within a few minutes. Start by selecting your language using t/u.
5.1 Changing channels 5.1.1 Direct access To directly access a channel, simply enter its number with the 0~9 buttons on the remote control. Channel numbers can be up to four digits long. Entering a number with less than four digits is possible. Just wait a few seconds and your receiver will switch to the channel number or just press OK after inserting. 5.1.2 Channel list Press OK in viewing mode to display the channel list.
— Green colour indicates that this an encrypted channel. — Green colour indicates that the channel is locked via channel lock. — Indicates that the current aspect ratio is broadcasted in 4:3 format. — Indicates that the current aspect ratio is broadcasted in 16:9 format. — Green colour indicates the presence of Dolby Digital audio stream. — Green colour indicates the presence of subtitles for the hearing impaired.
We strongly recommend you to carefully read and follow the specified points mentioned in chapter 1.5 Usage of external USB devices! Further please consider these points whilst using your receiver with an external USB storage device: Before you disconnect the USB device from the receiver, we recommend using the Remove the USB device function which is available in several menus of your receiver. If you have removed the USB device unintentionally, then please connect it again.
To delete a channel use the p/q buttons to select the channel, then press the BLUE button. Now you’ll be asked if you want to delete this channel. Press OK to confirm or EXIT to cancel. The channel(s) you delete from the channel list will be removed permanently, also if this channel is part of the favourite list. Add channel to favourite lists To add a channel to a favourite group, use the p/q buttons to select the channel, then press the FAV button. Now the favourite group selection will be displayed.
6.2.3 Manual search In this menu you can search for channels on a specific frequency or channel. This menu requires knowledge of some parameters in order to search on the correct channel/frequency in your area. Scan mode: Use t/u to choose between By Channel and By Frequency. If you set scan mode By Channel then following items are available: Band: Use t/u to choose UHF (Ultra High Frequency) or VHF (Very High Frequency).
Screen Mode: HDMI Output: Loop out in stand-by: Digital audio: Use t/u to adjust this setting in accordance with the aspect ratio of your TV set (4:3 or 16:9) and the preferred conversion. Options are: Auto (automatic detection of aspect ratio), 4:3 Panscan (displays 16:9 broadcasts full screen and cut upper and lower parts of 16:9 video on your 4:3 TV), 4:3 letterbox (displays 16:9 widescreen broadcasts with black bars on top and under the picture on a 4:3 TV).
Example: Your youngest child is 7 years old, so you have adjusted a rate of 07. You are switching to a channel which is not foreseen for an age below 10 years, so at this channel you will have to enter the PIN code (DEFAULT PIN: 0000). 6.3.6 Reset Factory Default This option allows you to reset the receiver to the factory settings, which clears all stored channels and settings. Warning: By resetting your receiver to the factory default, all your settings and stored channels will be permanently deleted.
In viewing mode, the receiver will notify you 10 seconds before a timer starts. You can confirm the timer by pressing OK or you can cancel it with EXIT. If there is no input given, the timer will be executed. After the timer event has been finished, the receiver switches to the channel which was watched before. If the receiver was in standby, it automatically turns to standby again after the timer passed.
6.4.6 Remove the USB device This menu item only appears if a USB device is connected. Select the menu and press OK to safely remove the USB device from your receiver. Now you can disconnect the USB device after the message USB device is removed disappears. Press MENU and use t/u to select Multimedia, then press OK. Following submenus will be displayed: Picture, Music, Movie, Photo Config and Movie Config. Use p/q to select a submenu and press OK or u to access.
6.5.3 Movie Your receiver supports playback of movie files in the following formats: MPG, MPEG, TS, VOB, MP4, AVI, MKV. To navigate in the list of files and folders, use the p/q buttons. To start playback of a movie press OK, to watch it in full screen mode press u. During playback, it is possible to perform the following actions: 2: To pause playback.
No signal found No picture or sound on TV Video with “mosaic”, audio is noisy or A/V disappears from time to time Message “No rights” or “Pay TV channel” Not possible to control the receiver with the remote control Forgot your PIN code The receiver switches off automatically. Possible reason The power plug is not connected The receiver is connected to the main power through an extender and the power is OFF. The antenna is disconnected. The antenna is damaged/ misaligned.
8.0 Technical specification Tuner Input connector: Input frequency range: Input signal level: Antenna power: Demodulation DVB-T/T2 Demodulation: Demodulation modes: Bandwidth: FFT mode: Guard interval: Forward Error Corrections: Video decoder Profile: Input bit rate: Aspect ratio: Frame rate: Video resolution: Audio decoder Audio support: Audio mode: Frequency response: IEC60169-2, female, 75 Ohm nominal VHF: 177.5 ~ 226.5 MHz UHF: 474 ~ 858 MHz -82 ~ -25 dBm 5 V DC, max.
General data: Input power: Power consumption: Power consumption in standby: Operating temperature range: Storage temperature: Operating humidity range: Dimensions (W x D x H) in mm: Weight: English AC 100 – 240 V ~ 50/60 Hz 10 W max. (with USB device connected) 0.70 W (without USB device connected) 0 ~ +40 °C -10 ~ +50 °C 10 ~ 85% RH, non-condensing 210 x 145 x 49 0.59 kg 9.
File Container Extension 3gp ts Video Codec Audio Codec SPEC Bit Rate 3GP MPEG-4, Sorenson H.263 1920x1080 @ 30p 20 Mbit/s ts AVS 1920x1080 @ 30p 20 Mbit/s Profile -//AVS Jizhun profile @ Level 6.
