Picture similar Digital High Definition Terrestrial Receiver SRT 8113 User Manual Manuel d’utilisation Manuale d'uso Manual do Utilizador
HOTLINE 0820 400 150 AT support_at@strong.tv 029 928 FR 0826 support_fr@strong.tv € 0,12/Min. österr. Festnetz € 0,15 par mn poste fixe en France 32 634451 BG +359 support_bg@strong.tv 1 445 26 10 CEE +36 support_hu@strong.tv IT 199 404 032 support_it@strong.tv Da rete fissa 24,8 cent. al min. 12,5 cent. scatto alla risposta Da rete mobile max 49 cent. al min. 15,6 cent. scatto alla risposta 501 49 91 DE 0180 support_de@strong.tv NL € 0,14/Min. deutsches Festnetz € 0,42/Min. max.
Table of Contents 02 Sep 2014 17:49 1.0 Introduction 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Accessories 1.5 Usage of external USB devices 2.0 Your Receiver 2.1 PIN-CODE DEFAULT: 1234 2.2 Front Panel 2.3 Rear Panel 2.4 Remote Control 3.0 Connection 3.1 Connecting to a Terrestrial Antenna 3.2 Connecting to TV with HDMI cable 3.3 Connecting to TV with SCART cable 3.4 Connecting to a Digital Audio Amplifier with S/PDIF 3.
PART 1 • English 1.0 Introduction 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
PART 1 • English We recommend you consult a professional installer to set up your equipment. Otherwise, please follow the instructions below: Refer to the user manual of your TV and antenna. Make sure that the HDMI cable and outdoor components are in a good condition. If you use TV SCART connection, use then well shielded SCART cable. This manual provides complete instructions for installing and using this receiver. The following symbols will serve as follow. Warning: Indicates warning information.
PART 1 • English 2. 3. IR sensor USB 2.3 Rear Panel 1. 2. ANT IN ANT OUT 3. TO TV 4. 5. 6. 7. S/PDIF HDMI TV SCART Power Cord Point your remote control towards this sensor. Connector for USB devices. Fig. 2 To connect to your antenna for the reception of broadcast signal. To connect to the terrestrial antenna input of your TV set. This connection will allow you to watch analogue terrestrial programmes if they are available via the tuner in your TV. To connect to a TV using a coaxial cable.
PART 1 • English 24. 25. 26. 27. 28. 29. 30. 31. 32. Shows the EPG (Electronic Programme Guide) in TV mode Menu On: Activates the highlighted menu item. 1 Start playback from selected file or resume Timeshift TIMESHIFT/2 Start Timeshift mode or pause 3 Stop of playback 4 Start Records the TV programme to the connected storage device ZOOM To zoom in to the video on screen ASPECT Change aspect modes: 4:3 LB, 4:3PS, 16:9 and to Auto.
PART 1 • English 3.5 Connecting to a Digital Audio Amplifier and TV using HDMI Fig. 5 By connecting your receiver to the latest digital amplifiers or Home Cinema systems you will enjoy the best possible sound quality and multi-channel audio (depending on broadcast). Connect the HDMI output of the receiver to an input of your amplifier, and then connect the HDMI output of the amplifier to your TV set. Select the correct input on your amplifier to watch and listen to programmes. 3.
PART 1 • English Set to On if you use an active antenna. When set to On, 5 V will be present on the ANT IN connector of the receiver. Select Off for passive antennas. The included antenna is a active type. If you using this antenna keep it selection to On. Note: Wrong region selection can lead to missing channels or channels being stored on wrong positions in the channel list. All default selections above are most common to use.
PART 1 • English 6.1.2 Channel list Press OK in viewing mode to display the Channel List. Use p q in the Channel List to highlight your channel of choice and press OK once to select the highlighted channel. Press OK again to leave the Channel List. TIP: Use t u to toggle between the All Channel list, Channel List and favourite lists or press FAV for a list of available favourite lists. 6.1.3 Using the p q or PG+/PG- keys p switches to the next channel. q switches to the previous channel.
viewing mode to activate this mode. On screen the time shift info banner appears. Press 1 to resume Timeshifted playback. Press 5 6 for fast rewind/fast forward. Press 3 to return to live TV. Note: Timeshift needs a connected USB storage device with sufficient free space and sufficient speed in order to work properly. 6.7 EPG (Electronic Programme Guide) The Electronic Programme Guide is a very useful function that allows you to view event schedules and information and to mark programmes for recording.
PART 1 • English Use the MOSAIC button to select between DVR, Video, Music or Image. Press the q button to move the highlight to the directory and the file field.Press OK to confirm the selection. The help banner at the bottom of the screen explains all buttons used in the Media player. Press EXIT to quit or more times to exit. Music: RED: Press the "Red" Play List button to show the Play List. Note: This is only possible if a Play List has been created.
DVR: RED: Press the "Red" Rename button to open the rename window to rename a recording. GREEN: Move the highlight to the programme that you want to lock. When pressing the "Green" Lock button, it will ask you to input password. The default password is "1234". After input of correct password, the programme is locked. If you want to unlock the programme, press the "Green" Lock button again. YELLOW: Move the highlight to the program me that you want to delete.
PART 1 • English Press EXIT to leave. 7.1.4 Games Your receiver is equipped with two games which can be played on your TV screen using the receiver remote control. Select one of the available games (Othello or Sudoku) using p q and press OK to start the game. Follow the directions on screen. Press EXIT to quit a game. 7.2 Edit Channel Use p q to select Edit Channel and press OK or u to enter. Use p q to highlight the submenu of choice and press OK to select.
symbol. When all changes have been made, press EXIT twice. A confirmation banner will pop up. Select Yes to save the changes or No to discard. 7.2.1.3 Moving channels To enable the Move function, press YELLOW while in TV Channel List. The Move symbol on the top of the screen will move up to indicate that the Move function is selected. Use p q to select a channel and press OK to select it. You can now move the selected channel up or down the channel list using p q.
PART 1 • English 7.2.3 Delete all Use this menu to delete all stored channels. Select Delete All with p q and press OK. The receiver asks you to enter the pin code. (DEFAULT PIN: 1234). In the confirmation window select Yes with t u and press OK to delete or select No to cancel. Warning: The Delete all function will permanently delete all current channels and all favourite lists from your receiver, and you are not able to leave the menu until you search for channels again. 7.3 Installation 7.3.
PART 1 • English Set this option to On if you connect a second receiver or TV to the loop out (ANT OUT) of this receiver. This will allow passing antenna signals if the receiver is in standby mode. To reduce power consumption is default set to Off. Note: The Antenna Power supplies (5 Volt) switch off in standby mode. If you are using an active antenna then the option RF Loop in Standby is not usable. 7.4 System Setup This menu allows you to manage the system settings of your receiver.
PART 1 • English Digital Audio Output: Toggles between PCM and Bitstream output. When PCM is selected, all digital audio will be converted to stereo audio. Bitstream enables multi-channel audio on HDMI for use with a Home Cinema Set. 7.4.3 Display Setting Here you can setup and adjust your video output if you do not like the colours in the playback of some media files or you want to change the colours for the TV screen. 7.4.4 Local Time Setting Here you can set up your region and time zone.
PART 1 • English English Use p q to select Parental Lock from the System Setup menu and press OK to proceed. You will be asked to enter your pin code. (DEFAULT PIN: 1234) Menu Lock: Locks the installation menu. You can set Menu Lock to On or Off. Rating Lock: Choose between: Off, AGE 10, AGE 12, …up to AGE 18. Channels with a parental rating above the chosen age will be protected with a password (if available in your local broadcast.) New Password: Enter your new password (4 digits) here.
PART 1 • English Input the correct password using the 0~9 buttons (default PIN: 1234). A confirmation window is displayed. Select Yes to return to factory settings. Select No to cancel. Press EXIT to leave. 7.5.3 S/W Upgrade by OTA This receiver is equipped with a manual and automatic OTA “Over-The-Air” software upgrade mechanism. This menu allows you to manually upgrade the Over-The-Air update if the automatic update mechanism does not function. It might not be available in your region.
PART 1 • English Note: English After performing this function, the USB device is no longer accessible from your receiver. To gain access to your storage device again, re insert it or switch the receiver to standby and on again. 8.0 Troubleshooting There may be various reasons for abnormal operation of the receiver. Check the receiver according to the procedures shown below. If the receiver does not work properly after checking it, please contact your dealer or the local Service Hotline.
PART 1 • English Problem Possible cause What to do After moving the receiver to another room/area you are no longer able to receive digital reception Antenna signals are too weak Press the INFO button on remote 2x to call up signal bars and adjust antenna for (maximum) reception or rescan channels The receiver switches off automatically. Auto Standby function enabled. Disable auto standby. See section 7.3.4.2 for details. 9.
Multimedia Video playback: Audio playback: Picture view: MPEG-1 and MPEG-2 encoded (mpg), VOB, AVI, MKV, TS, M2TS, MPEG-4 and MOV* MP3* JPEG* *STRONG cannot guarantee the playback of all files although extensions are listed, as it depends on codec used, data bit rate and resolution (all MPEG codec formats are supported). Connectors ANT IN: ANT OUT: TV SCART (RGB, CVBS, Audio L&R) TO TV: HDMI S/PDIF (coax.) USB 2.
PART 1 • English 22
