Picture similar Digital Terrestrial High Definition Receiver SRT 80 User manual Bedienungsanleitung Manuel d’Utilisateur Manuale Utente Instrukcja obsługi Manual do Utilizador
01 Jul 2013 15:37 Table of Contents 1.0 Introduction 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Accessories 1.5 Usage of external USB Hard Disk Devices 2.0 Your Receiver 2.1 PIN-CODE DEFAULT: 0000 2.2 Your receiver 2.3 Remote Control 3.0 Connection 3.1 Connecting to TV Set and Aerial 3.2 Connecting to Remote sensor and External Power 4.0 Getting started 4.1 First Installation 4.2 Installation 5.0 Operation 5.1 Changing Channels 5.
PART 1 • English 1.0 Introduction 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
PART 1 • English English MENU Represents a button on the remote control or the receiver. (Bold Characters) Move to Represents a menu item within a window. (Italic Characters) 1.4 Accessories 1. 2. 3. 4. 5.
PART 1 • English 9. pq Navigation buttons used to navigate menu items Channel up/down Play Previous or Next file in multimedia. 10. tu Navigation buttons used to navigate menu items Volume up/down 11. OK Confirm a selection within a menu 12. RECORD Record a TV programme 13. TIMESHIFT Activate Timeshift function 14. 0~9 Enter numeric values and select the channel directly by entering its number Numbers used in Multimedia functions 15. EPG Open the Electronic Programme Guide 16.
PART 1 • English English Note: The correct country setting is required to select the corresponding scan process in use for that particular country. After the channel search you can change (additional) settings in the menu, as described in this chapter. Throughout the menu use the navigation buttons pqtu to select Highlight and change settings. Press OK to confirm if a change is made. Press EXIT to exit the menu or press MENU to go one step back. 4.2 Installation Press MENU to enter the Main menu.
PART 1 • English 5.3 Channel main menu Press MENU to enter the Main menu, then press tu to highlight Channel and q to enter the Channel menu. Press pq to highlight the desired item and press OK to enter the sub-menu. Press EXITto exit. 5.4 TV Channel Editor In the Channel menu, select TV Channel Editor and press OK to enter the TV channel Editor menu. Press pq to highlight a channel. The selected programme is shown in the preview window. RED: Edit: Name, Move, Sortand Skip the channel.
PART 1 • English English function. The default LCN setting is made by the country setting. The default setting can be overruled in this menu, by setting the LCN Mode on/off. 6.0 Time 6.1 Time main menu The time menu allows you to set GMT Usage, Time Zone, Date, Time, SleepTime, Summer Time and AdvTimer. Press MENU to enter the Main menu and tu to highlight Time, then press q to enter the Time menu. Press pq to highlight the desired item and press OK to enter the sub-menu. Press EXIT to exit.
PART 1 • English Note: Some TVs force its screen format to an own setting and cannot always be overruled. TV Mode: PAL Video Output: HDMI/SCART(CVBS)/SCART(RGB). Note: When an HDMI cable is connected to the TV, the unit will automatically switch to HDMI output (“Handshake”), and cut the analogue video outputs, to avoid that the TV switches to Scart input.
PART 1 • English English Channel Lock: OFF/ON. If set to “ON”, select channels to be locked in the TV or radio channel editor page. Parental Lock: No Block/Total Block/05/06/07/08/09/10/11/12/ 13/14/15/16/17/18. Age restriction information to programmes can be transmitted by the broadcaster. Note: If any of the above mentioned items are set to “ON”, then you need a valid PIN to gain access to the Parental Control menu again.
PART 1 • English WARNING: Use this function with care. 9.5 Calendar This menu allows you to check the calendar as a service. Enter the Others menu, select Calendar and press OK. The Calendarpage is shown. Use the navigation buttons to walk through the dates. Press EXIT to exit. 9.6 Calculator This function allows you to use the calculator. In the Others menu, select Calculator and press OK to enter the Calculator page. Use the navigation buttons or numeric keys to enter data. Press RED to calculate.
PART 1 • English English Repeat All/Off Info option, select Music info or Lyrics, if applicable. 2: Browse by thumbnail or folder. 3: When folder is selected, change the folder’s size: small, normal or big. 10.2.3 Photo 1: Set Option. Random play order On/Off Repeat All/Off Interval time: slow, medium, fast 2: Browse by thumbnail or folder. 3: When folder is selected, change the folder’s size: small, normal or big.
PART 1 • English 11.0 Timeshift and record Plugging an external USB storage device on the USB port gives you access to Timeshift or you can record a broadcasted programme. Pause a broadcast programme and continue watching it a while later (Timeshift). Record a broadcast programme. When the space available on the USB Storage Device runs out, recording will stop. NOTE: Please use a USB 2.0 disk when recording or Time shifting.
PART 1 • English Possible cause Scart/AV/HDMI is not selected on your TV What to do Check for the correct input on your TV/monitor When HDMI is connected, the Scart output is switched off automatically. Scrambled channel message Channel is scrambled Select alternative channel No response to remote control Receiver off Handset not aimed correctly Sensor ‘eye’. obstructed Hand set batteries exhausted Plug in and turn on Aim handset at sensor ‘eye’.
PART 1 • English Connectors ANT IN - IEC Female TO TV – IEC male TV SCART (RGB, CVBS) USB port (Type A) 5 V/800 mA (max.) Audio output (L/R) S / PDIF (coax.) HDMI IR sensor input DC IN 12 V/1 A General Data Power adaptor: 100~240 V AC in, 50/60 Hz, DC out 12 V / 1 A Power consumption: typ. 3.8 W, max. 10 W Power consumption in standby: 0.