Abbildung ähnlich Digitaler High Definition Satelliten Receiver SRT 7805 Bedienungsanleitung
1 2 3 4 6 MENU OK EXIT 5 7 Fig. 1 2 1 3 4 5 6 7 Fig. 2 1 2 3 4 6 7 11 10 11 5 8 9 15 14 18 19 16 17 18 21 23 24 27 28 31 33 Fig.
SCART A 12V/230V B C Fig. 4 HDMI 12V/230V A B C Fig. 5 A A B Fig.
PART 2 • English Table of Contents STRONG declares that this item complies with the basic requirements and other relevant regulations of directives CE 2004/108/EEC and 73/23EEC; RoHS 2002/95EEC Manufactured under license from Dolby Laboratories Dolby’ and the ‘double-D’ symbol are trademarks of Dolby Laboratories Subject to alterations. In consequence of continuous research and development technical specifications, design and appearance of products may change.
PART 2 • English 1.0 INTRODUCTION 1.1 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
PART 2 • English Warning: Indicates warning information. Note Indicates any other additional important or helpful information. MENU Represents a button on the remote control or the receiver. (Bold Character) Move to Represents a menu item within a window. (Italic Character) 1.
PART 2 • English 2.0 Your Receiver 2.1 DEFAULT PIN-CODE: 0000 2.2 Front Panel Fig.1 1. 2. 3. 4. 5. 6. 7. Standby/ON switch Turns the receiver ON or to Standby Navigations buttons Menu navigation 4 digit LED display Displays channel number or time MENU Opens the OSD menu EXIT Exit from menu OK Confirm selection Card reader Slot to insert HD+ card for access of HD+ channels* 2.3 Rear Panel 1. 2. 3. 4. 5. 6. 7. 8. 9. Fig 2.
15. Green For Teletext function, in OSD for specific functions. 16. Yellow For Teletext function, in OSD for specific functions. 17. Blue In viewing mode opens the EPG overview, for Teletext and in OSD for specific functions 18. pq Scrolls channel and EPG information up/down in viewing mode, in OSD for navigation. 19. tu In OSD for navigation 20. OK In viewing mode displays the channel list, in Menu mode activation/ confirmation of the specific item 21.
PART 2 • English 4.0 Starting up for the first time Ensure that your satellite signal is of good quality and that all connections are sound. In case of difficulties or questions, please ask you local dealer for assistance. It is recommended to follow the Setup Wizard step by step. It will guide you through the basic installation and channel searching process. You can enjoy digital HD broadcasts within just a few minutes. 4.
PART 2 • English We at STRONG understand that you can’t wait to enjoy your new HD+ receiver. The following quick guide will make you familiar with the basic operation of this device. We do, however, advice you to read the full manual to get the best performance from your STRONG HD+ receiver. To turn your receiver ON or to Standby, use the STBY button on the remote control or the button on the left side of the front panel.
PART 2 • English 6.2 Info Banner At any time during viewing mode you can press the INFO button to get info about the current channel and program*. Press INFO twice to see program details about the current channel. Note: Program information is only displayed when available. Availability depends on the broadcaster. 6.3 Audio language and Audio mode Press OPT button in viewing mode to display this (Optional Settings) menu In this menu you can select the Audio language and Audio Mode.
PART 2 • English 6.7 Recording Your receiver allows you to make an instant recording of the program you are watching, to an external USB HDD. Simply press 4 to start the recording. Press INFO button during a recording to see channel and record time information. To stop the recording, press 3 button and select OK and confirm with OK button. The maximum record time of each event is 2 hours. Note: Please connect an USB storage device with sufficient free space before you start a recording.
PART 2 • English 7.1 Channel Setup The installation menu allows you to change satellite settings and to search for channels. It consists of the following sub-menus: Channel Scan and Channel Editor. Choose the desired sub menu with pq and press OK to advance. 7.1.1 Channel Scan Use this menu to select the satellite, change the settings for the used antenna and start scan process for searching the channels.
PART 2 • English 7.1.2 Channel Editor Here you can Delete, Set Favourites, Lock, Move and Sort your channels. Press TV/RAD button on your remote to select TV or Radio channel list. Use tu pq to highlight and OK to select channel(s) for the desired option explained below: Press RED button to delete the selected channel/s or channel group/s. Press GREEN to add or remove channels to/ from your favourite group. Press YELLOW to lock channel/s with a PIN code before you can watch or deleted it/them.
PART 2 • English 7.2.1.3 Receiver Information: This menu contains valuable information about the model number, the software version and our web address www.strong.tv. A customer support agent might ask for the information given in this screen. Press EXIT to leave this menu. 7.2.1.4 User Setup: Within the User Setup menu you can configure the audio and video outputs of your receiver. Use pq to highlight the setting you wish to change and tu to change the value of the highlighted setting.
PART 2 • English 7.2.2 Factory Default: A factory default will reset all settings of the receiver to the factory default. To reset the receiver, you have to enter your PIN code (Default PIN: 0000) Select Factory Initialization and Press OK. You have to enter your PIN code again to make 100% sure that you want to perform this action. After the reset, the receiver will start up with the Setup Wizard. 7.2.
PART 2 • English To safely remove the external USB storage device press the GREEN button. Use EXIT to go back to the previous menu. Warning The Format function will delete all records, data and information from your USB device. STRONG will not take any responsibility for damaged or lost data on the USB device. Please make a backup copy of important data on your USB device before you are going to use it with your receiver.
PART 2 • English 7.5 Program Guide The Program Guide menu allows you access (EPG) Electronic Programme Guide and to set Timers for wakeup and/or recording. Choose the desired sub menu with pq and press OK to advance. 7.5.1 EPG The Electronic Programme Guide is a very useful function that allows you to watch programme schedules and information on screen and to mark programs for recording. Find all detailed descriptions in chapter 6.6 EPG Availability of EPG data depends on the broadcaster. 7.5.
PART 2 • English Warning NEVER power off the receiver or pull the mains plug during the software upgrade process. Doing so might cause irreparable damage to your receiver and will void your warranty. A.1 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver. Please check the receiver according to the procedures as explained below. If the receiver does not work properly after checking it, please contact your local Service line or STRONG dealer.
PART 2 • English A.2 SPECIFICATIONS Demodulator Demodulation: QPSK, 8PSK Input symbol rate: DVB-S QPSK: 1 ~ 45 Ms/s DVB-S2 8PSK/QPSK: 10~30 Ms/s FEC decoder: Auto, 1/2, 2/3, 3/4, 5/6, 7/8 in DVB-S mode 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 9/10 in DVB-S2 mode 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 in 8PSK mode English Video Decoder Profile level: MPEG-2 MP@ML, MP@HL, MPEG-4 H.264/AVC Input rate: Max.
General Data Supply voltage: 100 – 240 V AC @ 50/60 Hz ± 5 %, max.1.1 A Power consumption: max 30 W, typ. 13 W (without external device) Power consumption in stand-by: 1.30 W (without external device) Operating temperature: +5 ~ +35 °C Storage temperature: -20 ~ +60 °C Operating humidity range: 25 ~ 75 % RH, non-condensing Size (W x D x H) in mm: 265 x 190 x 45 Weight: 0.90 kg 09 Nov 2010 16:04 PART 2 • English EAN code SRT 7805: 8717 185 445 398 A.3 Allgemeine Geschäftsbedingungen HD+ 1.
PART 2 • English Services bzw. eine Umgehung der Verschlüsselung ermöglichen. Eine Verlängerung des HD+ Services nach Ablauf der Freischaltung gemäß Ziffer 3.1 ist auf gesperrten bzw. nicht mehr unterstützten HD+ Karten nicht möglich. 1. 2. 3. Der HD+ Service steht natürlichen Personen im Alter von mindestens 18 Jahren zur Verfügung und ist ausschließlich für die private, nicht-gewerbliche Nutzung bestimmt.
PART 2 • English 5.0 Rechte und Pflichten des Nutzers 1. 2. 3. 4. Jeder Nutzer des HD+ Services trägt selbst die Verantwortung für die bestimmungsgemäße Nutzung; der Nutzer hat insbesondere sicherzustellen, dass jugendgefährdende Sendeinhalte nur dem gesetzlich zugelassenen Personenkreis zugänglich sind. Der Nutzer darf den HD+ Service nicht missbräuchlich nutzen und ist verpflichtet, seine HD+ Karte vor Verlust und Missbrauch zu schützen.
2. 3. 4. aufgrund von Einflüssen, die HD PLUS nicht zu vertreten hat, kann HD PLUS darum nicht ausschließen. HD PLUS übernimmt insbesondere keine Gewähr dafür, dass bestimmte Programmangebote zu einem bestimmten Zeitpunkt empfangen werden können; dies gilt nicht, soweit HD PLUS eine Störung zu vertreten hat. Der Nutzer erkennt an, dass die Qualität der entschlüsselten bzw.
PART 2 • English 11.0 Datenschutz Einzelheiten zur Datenverarbeitung sind im Datenschutzmerkblatt enthalten (siehe www.hd-plus.de/datenschutz). 12.0 Schlussbestimmungen 1. 2. Stand: August 2010. HD PLUS ist berechtigt, ihre Rechte und Pflichten aus diesem Vertrag ganz oder teilweise auf einen zur ord-nungsgemäßen Fortführung des Vertrages geeigneten Dritten zu übertragen. Der Nutzer ist in diesem Fall berechtigt, das Vertragsverhältnis mit Wirksamkeit zum Zeitpunkt der Übertragung zu kündigen.
