Picture similar Digital Satellite Receiver SRT 6511 User Manual
PART 1 • English 1.0 INTRODUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Features & Accessories 2 2 3 3 3 2.0 YOUR RECEIVER 2.1 Front Panel 2.2 Rear Panel 2.3 Remote Control Unit (RCU) 4 4 4 4 3.0 Connections 3.1 Connecting to TV & VCR 3.2 Connecting to Digital Audio Amplifier 3.3 Connecting to Satellite Dish 3.4 Connecting to computer by serial cable 5 5 5 5 5 4.0 Starting up for the first time 4.1 Language Selection 4.2 Audio Language Selection 4.3 Time Zone adjustment 4.
PART 1 • English 1.0 INTRODUCTION 1.1 Safety Instructions rounding, Polarization — If this product is used with a specified G AC adapter, the adaptermay be equipped with a polarized alternating current line plug (a plug with one blade wider than the other). This safety feature allows the plug to fit into the power outlet only one way. If you cannot insert the plug into the wall outlet, pull it out, reverse it, and then reinsert it.
PART 1 • English 1.2 Storage English Your receiver and its accessories are stored and delivered in a packaging designed to protect against electric shocks and moisture. When unpacking it, make sure that all the parts are included and keep the packaging away from children. When transporting the receiver from one place to another or if you are returning it under warranty make sure to repack the receiver in its original packaging with its accessories.
PART 1 • English Note: The batteries should not be recharged, disassembled, electrically short-circuited or be mixed or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote control. 2.0 YOUR RECEIVER 2.1 Front Panel Figure 1 1. Power To put the receiver in and out of standby mode. 2. Menu Used to display the main menu. 3.
PART 1 • English 20. F1 21. F2 22. F3 23. TXT Sleep Timer. Subtitles. No function Teletext English 3.0 Connections 3.1 Connecting to TV & VCR Basic connection with a SCART cable (Fig. 3) 1. Connect the satellite signal from the LNB to the SAT IN connector. 2. Connect the TV SCART connector at the back of the receiver to the SCART IN connector on your TV set. Basic connection with an RCA cable (Fig. 4) 1. Connect the satellite signal from the LNB to the SAT IN connector. 2.
PART 1 • English 4.1 Language Selection Press pq buttons to choose your language, press OK to confirm. In case of German selected, there is an extra option available of preset antenna configuration with ASTRA 19.2E (LNB1) and HOT BIRD 13.0E (LNB2) through DiSEqC switch. In Czech the configuration ASTRA 19.2E (LNB1) and ASTRA 23.5E (LNB2) is available. 4.2 Audio Language Selection Select your preferred Audio language using the pq buttons and press OK to confirm.
DiSEqC: If your antenna is connected through a DiSEqC switch and you have already executed the First Installation with mySAT search then this setup is already according your installation. You only need to specify the DiSEqC input in case it has been wrong configured or the installation setup has changed. Use the tu buttons to select the correct setting, press OK to confirm. GOTO X settings: Here you can setup your location in order to use GOTO X type of Positioner.
PART 1 • English 5.1.4 Satellite Search In Satellite Search menu you’ll find satellite list and transponder list. Select one or more satellite(s) you want to search and press OK to select. Press RED if you want to Scan ALL channels or GREEN to Scan Free channels. 5.1.5 Manual TP Search This menu allows you to search for specific transponders. Use the pq and tu buttons to select the satellite and transponder you want to search for.
PART 1 • English English Parental Control: Default this small submenu shows Input New PIN-code and Confirm PIN-code, where you can enter new PIN-code and confirm it, if you want to. The default PIN-code is 0000. Use the tu buttons to set Option for Password Lock and Menu Lock. If you want to lock channels, the Password Lock must be switched to ON, or if you want to lock the whole menu, then Menu Lock must be switched to ON, please confirm settings with OK. 5.
PART 1 • English Tetris This is a very classic game, you can play with the pqtu buttons. tu Move block to left or right direction q Drop block p Rotate block BLUE button: Pause Snake tu Move snake icon to left or right direction. pq Move snake icon to up or down direction. If the snake has passed the brown (food) icon length will be increased, if passed through the yellow icon length is decreased. If it has passed through white icon current game is over.
PART 1 • English 6.4 Channel list and view mode In viewing mode press OK button and the channel list will be shown. Press the pq buttons to select the channel and press the OK button to view selected channel. To switch between TV and Radio channels press the TV/Radio button. English You can sort channels by FTA -> CAS by pressing the RED button, or A-Z by pressing the YELLOW button. You can select satellite by pressing the GREEN button. 6.
PART 1 • English A.2 PIN CODE The default PIN code is 0000. A.3 Specifications Demodulator Modulation: QPSK Input Symbol Rate: 2 - 45 Ms/s SCPC & MCPC signals from C & KU band satellites Video Decoder Profile level: MPEG-2 Main profile @ Main level Data Rate: Up to 60 Mbit/s Video Resolution: 720 x 576, 720 x 480 Video Format: NTSC, PAL Aspect Ratio: 4:3, 16:9 Audio Decoder MPEG-1/MusiCam Layer I & II, AC3 Audio mode: Mono, Dual mono, Stereo Sampling Rate: 32, 44.
