Picture similar Digital Terrestrial Receiver SRT 5303 User manual
1 6 1 2 3 4 5
PART 1 • English 2 2 3 3 4 4 2.0 Connection 2.1 Connecting to TV and Terrestrial Antenna 2.2 Connecting to a DVD/Video Recorder 2.3 Connecting to a Digital Audio Amplifier 4 4 4 4 3.0 Your Receiver 3.1 Front Panel 3.2 Rear Panel 3.3 Remote Control 3.4 Default PIN- code: 0000 5 5 5 5 6 4.0 First Time Installation 6 5.0 Main Menu 5.1 Channel 5.2 Installation 5.3 Setup 5.4 Tools 5.5 Media+ 5.6 Time shift and Recording functions 6 6 8 9 10 11 13 6.0 OPERATION 6.
PART 1 • English 1.0 Instruction 1.1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Heat – Never use or store this product near any heat source such as a radiator heat register, stove, or any type of equipment or appliance that generates heat, including stereo amplifiers. Servicing – Refer all servicing to qualified personnel. Attempting to remove the covers or disassemble the product, could expose you to dangerous high voltage points. Damage Requiring Service – If you notice any of the conditions described below while using a specified AC adapter.
PART 1 • English 1.4 Accessories 1 User Manual 1 Remote control unit 2x Batteries (AAA type) Note: The batteries should not be recharged, disassembled, electrically shortcircuited or be mixed or used with other types of batteries. If rechargeable accumulators instead of batteries are going to be used, we recommend using (e.g. NiMH) types with low self-discharge to ensure long time operation of remote control. 1.5 Usage of external USB devices It is recommended to use USB 2.0 storage devices.
PART 1 • English 3.1 Front Panel Fig. 2 USB Connects to USB storage device 3.2 Rear Panel Fig. 3 1. ANT IN To connect an antenna for reception of broadcasting signal. Active antennas can be supported with max. 5 V/500 mA DC. 2. TO TV To connect a TV set or to connect an extra receiver. 3. TV SCART Connector To connect your receiver with your TV set using a SCART cable. 4. DVD/VCR SCART To connect to a Video or DVD recorder 5. S/PDIF Coaxial To connect your receiver to digital audio amplifier. 6.
PART 1 • English 22. SUBTITLE Shows list of subtitled languages 23. 5 6 Rewind/Fast forward of video files 24. Coloured buttons for Teletext and other functions 3.4 Default PIN- code: 0000 4.0 First Time Installation If you use the receiver for the first time, the Easy Install menu appears. Use pq to select Region, OSD Language, Antenna Power and Scan Mode and tu to select options. Then use the pq buttons to move focus to Search and press OK to proceed with the automatic channel scan. 5.
PART 1 • English English Skip: Press 3 to Skip one channel or all channels. Use tu to select Yes in the confirmation window and press OK to save. Selected channel/s will be marked with the Enter and will be skipped during channel zapping in full screen mode. Delete: Press 4 to Delete one channel or all channels. Use tu to select Yes in the confirmation window and press OK to save. Rename: To Rename a channel press button 5. When all desired changes are made, press EXIT to leave the menu. 5.1.
PART 1 • English Group Rename In this menu you can change the name of favourite groups. Use the pq buttons to select Group Rename and press OK to enter. 1. Select a group with pq and press OK. 2. Use the pqtu buttons to navigate the on screen keyboard. Highlighted characters can be inserted by pressing OK. After entering the desired group name, highlight OK at the keyboard to confirm. 3. Press EXIT to cancel the group rename. 5.2 Installation 5.2.1 Auto Scan 1.
PART 1 • English 5.3 Setup English This menu allows you to set OSD Language, Subtitles preference, TV System, Region and Time, Timer Setting, OSD Setting and Parental Lock. 1. Use pq to highlight the desired menu and press OK to proceed. Select the desired item with pq. Settings can be changed with the tu buttons. To get a better overview of possible settings, press OK first. Now you can select settings with pq and confirm with OK. 2. Press EXIT button to exit. 5.3.
PART 1 • English Time: Press OK to input the time with the numeric buttons. When you leave the programme timer, a saving window appears. Use tu to select Yes in the confirmation window and press OK to save or select No to cancel. Duration: Press OK to input the timer duration with the numeric buttons. Sleep Timer You can set the receiver to power OFF in 10 min, 30min, 60min, 90min and 120min automatically. 5.3.
PART 1 • English 5.4.2 Game English This menu allows you to play games (Tetris, Snake and Othello) on this receiver. 1. Select Game in Tools menu and press OK to enter the game menu. 2. Use pq to select a desired game, and press OK to enter the game. Highlight Start and press OK to start the game. For changing levels highlight Setup and use the tu buttons. 3. Press EXIT to quit the game. NOTE: You can also press OK to pause playing. 5.4.
PART 1 • English 1. Press MENU to enter main menu. Select Media+ and press OK to enter Media+ menu. 2. Press pq to highlight desired menu and press OK to enter. 3. Press EXIT to exit. Use the three button rows on the bottom of RCU for player operation. Description for further usage of buttons will be displayed on screen. 5.5.1 Media Player This function allows you to play MPEG-1, MPEG-2, audio and photo files from a connected storage device. 1.
PART 1 • English English 2. Use pq to select a desired item and use tu to change settings. 3. Press EXIT to exit. Timeshift Time(min): Maximum shifted time 10/20/30/40/50/60 Record Type: TS/PS (TS mode will record all broadcasted data, including subtitles) Standby Mode: ON/ OFF (After a Timer recording has ended.) Record Recovery: ON/ OFF (After a power cut, the receiver will continue to record.) Step to (min): 0.5/ 1 / 3 / 5 / 10 minutes. Defines the jump interval during the playback of a recording.
PART 1 • English From EPG Press the EPG button to enter the programme guide. Select an event and channel with the buttons described on screen. Once the desired event is highlighted, press 4 / 4 to plan a timer on this event. The event time will be copied into a free Program Timer. It is possible to adjust the start and duration time for this timed event. Manual scheduling You can set a record manually via the Timer menu. For details refer to chapter 5.3.4 Timer Setting.
3. In the event schedule, press the numeric button 3 to book a timer for the highlighted event. Press OK to open the Detail menu for the selected event. 4. Press the numeric button 1 to open the Booking list menu. 6.3 Accessing the favourite channels 1. In viewing mode, press FAV to enter the favourite group menu. 2. Use pq to select the desired favourite group. 3. Press OK to enter the favourite channels list, and use pq to select the desired channel. 7.
PART 1 • English Problem Possible cause What to do After moving the receiver to another room / area you are no longer able to receive digital reception Antenna signals are too weak/ coming from different antenna Antenna feed may come through a distribution system which may reduce the digital signal Press the INFO button on remote 3x to call up signal bars and adjust antenna for (maximum) reception or rescan channels Try a direct feed from the antenna or try to use an active room antenna The receiver
PART 1 • English English Memory and System: Flash memory: 1 MByte SDRAM: 8 MBytes Connectors: ANT IN - IEC Female TO TV - IEC Male TV SCART (RGB, CVBS) VCR SCART S/PDIF: coaxial output USB 2.0 port, max. 5 V/800mA General Data: Supply Voltage: 220 - 240 V AC (SMPS), 50/60 Hz Power Consumption: 4.00 W (typ.), 5 W (max) Power consumption in Standby: 0.
PART 1 • English 18
