Picture similar Digital Terrestrial Receiver SRT 5203 Digital Terrestrial Twin Tuner Receiver SRT 5222 User manual SRT 5203, SRT 5222 SRT 5222
PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions 1.2 Storage 1.3 Equipment Set-up 1.4 Accessories 2 2 4 4 4 2.0 YOUR RECEIVER 2.1 PIN-CODE DEFAULT: 0000 2.2 Front Panel 2.3 Rear Panel 2.4 Remote Control 5 5 5 5 5 3.0 CONNECTION 3.1 Connecting to Terrestrial Antenna 3.2 Connecting to TV, DVD/Video Recorder and Hi-Fi 3.3 Connecting a USB storage device 6 6 6 6 4.0 FIRST TIME INSTALLATION 6 5.0 MAIN MENU 5.1 Channel 5.2 Installation 5.3 Setup 5.3.5 OSD Setting 5.4 Tools 5.
PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of not isolated dangerous voltage with the inside of the product that may be of sufficient magnitude to constitute a risk of electric shock to persons.
PART 1 • English English installation such as a book case or rack, unless proper ventilation is provided. Ensure that free airflow is maintained around the receiver. Protecting the Power Cord — The power supply cord should be placed so it will not be walked on. Never put a heavy object on the power cord or wrap it around the leg of a table or chair. Keep the area around the power cord connection points, at the power outlet, and at the product connection, free of all AC adapter or accessory power cords.
PART 1 • English Where the mains plug or all — pole mains switch is used as the disconnect device, the disconnect device shall remain readily operable. Remote control transmits a directional infrared beam. Ensure to aim the remote control directly at the infrared sensor of the unit during operation.
PART 1 • English 2.1 PIN-CODE DEFAULT: 0000 2.2 Front Panel English 2.0 YOUR RECEIVER Fig. 1 2.3 Rear Panel Fig. 2 1. ANT IN To connect an antenna for reception of broadcasting signal. 2. TO TV To connect a TV set or to connect an extra receiver. 3. S/PDIF Coaxial To connect your receiver to digital audio amplifier. 4. USB To connect an USB device 5. TV SCART To connect your receiver with your TV set using a SCART cable. 6. VCR SCART To connect to a Video or DVD recorder 2.4 Remote Control Fig.
PART 1 • English 21. TTX Shows Teletext on OSD (On Screen Display) 22. SUBTITLE Shows list of subtitled languages 23. tt uu Fast rewind / Fast forward 24. COLOURED BUTTONS For Teletext and other functions 3.0 CONNECTION 3.1 Connecting to Terrestrial Antenna To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver. SRT 5203 Fig. 4; SRT 5222 Fig. 5 3.2 Connecting to TV, DVD/Video Recorder and Hi-Fi SRT 5203 Fig. 4; SRT 5222 Fig.
PART 1 • English 1. In Channel submenu select TV Channel List with the pq buttons and press OK to enter. 2. Use the tu buttons to change channel group (assumed you have already set up Favourite groups). 3. With the pq buttons select the channel you want to watch. With OK you can watch the selected channel in full screen mode. 5.1.1.1 Edit Use this menu to favour, lock, skip, delete and rename channel list. Press numeric button [1] to enter Edit menu.
PART 1 • English 5.1.1.4 Move Press the [4] button to activate the Move function. The selected channel will be marked in a symbol, use the pq buttons to move the selected channel to the desired position. With tu select Yes in the confirmation window and press OK to save. 5.1.
PART 1 • English English 4. When By Channel is selected use the cursor buttons to select Scan Band and Channel No. When By Frequency is selected use the cursor buttons to select Frequency and Bandwidth. Select Network Search to ON or OFF, highlight Search and press OK to start scan. After Channels are found, they will be stored and receiver switches to the first one saved in the list. 5.2.3 Antenna Setting 1. 2. 3. 4. Press MENU to enter main menu.
PART 1 • English GMT Usage: GMT Offset: Date/Time: Time Display: This menu is used for usage of GMT. The options are: Off / User Define / By Region This menu is valid only when selected “User Define” in GMT Usage menu. The GMT offset range is “-11:30 ~ +12:00”, increasing by half hours progressively. “Date” and “Time” menus are valid only when selected “Off” in GMT Usage menu. Press OK then numeric button to change the date and time. This menu allow to control whether the time is displayed on screen or not.
input the password (default: 0000). Menu Lock: Locks the installation menu. You can set menu lock to ON/OFF. Channel Lock: Off/Manual/Age:4 - Age:18 New Password: To change the password. Confirm Password: To confirm the new password. 5.4 Tools Press MENU button to enter main menu. Select “Tools” and press OK button to enter tools menu. 1. Press pq buttons to highlight the desired menu and press OK button to enter. 2. Press EXIT button to exit. 5.4.
PART 1 • English 5.4.4 Software Upgrade 1. Enter “Tools” menu, select “Software Upgrade” and press OK button, Software Upgrade menu is shown. 2. Press pq buttons to select “Upgrade by Storage” item and press OK button, you are asked to input password. 3. Input the correct password (the default password is 0000), Software Upgrade submenu is opened. Then select the correct software file and press OK to start. Message will be displayed to confirm update process, select “Yes” to confirm or “No” to cancel. 4.
2. Press pq to select a desired recording and press OK or BLUE (u) button to playback the desired files. 3. Press EXIT to exit. During the playback, it is possible to perform the following actions: YELLOW (2): to pause the playback. 6 for fast forward or fast rewind during playback GREEN ("): press once to perform slow motion, every further press will change the slow motion speed (1/2, 1⁄4, 1/8). 5.5.3 Removable Disk Information In this menu you can display information about the storage device. 1.
PART 1 • English Stop Time shift If you want to stop Time shift press EXIT or pq, then a confirmation window appears. Select Yes to stop Time shift or select No to continue Time shift. Record There are 3 different ways to record programmes: Instant recording, recording from EPG and recording via timer Instant recording In viewing mode press 4 to instantly start a record on the current channel. Press RED (3) to stop recording. If you press 4 again, you can adjust the duration for this record.
PART 1 • English 1. In “Media+” menu, select Disk Format and press OK to enter this menu. You will see actual used Device and Partition displayed, furthermore the available Capability in GB is shown. 2. Press pq to select File System and use tu to change between FAT/ NTFS settings. 6.0 OPERATION 6.1 Changing Channels There are 4 ways of channel selection - stepping through the channel list, selection by number, from the on-screen channel list, and using the electronic programme guide (EPG). 1.
PART 1 • English A.1 TROUBLESHOOTING There may be various reasons for the abnormal operation of the receiver. Check the receiver according to the procedures shown below. If the receiver does not work properly after checking it, please contact the dealeror the local Service Hotline. Do NOT open the receiver cover. It may cause a dangerous situation and the warranty will get void.
PART 1 • English Memory and System Flash memory: 1 MByte; SDRAM: 16 MBytes Multimedia Video playback: MPEG-1 and MPEG-2 encoded (mpg) Audio playback: MP3 and WMA formats Picture view: JPEG format Connectors ANT IN: IEC 169-2 Female TO TV: IEC Male; TV SCART (RGB, CVBS) VCR SCART: Composite Video, Audio L/R S/PDIF: coaxial output USB 2.0 port, max. 5 V / 500 mA supported General Data: Supply Voltage: 220 – 240 V AC (SMPS), 50/60 Hz Power Consumption: SRT 5203 – typ. 4.5 W, max. 8 W; SRT 5222 – typ. 6.
PART 1 • English 18
