Digital Terrestrial Receiver SRT 5005/5010/5015 www.strongsat.
SRT 5005-15 ENG 1/24/06 3:41 PM Page 2 1.0 2.0 3.0 4.0 5.0 Safety Instructions Features & Accessories Safety Precautions Storage Equipment Set-up 3 4 5 5 5 6.0 6.1 6.2 6.3 6.4 Connection Connecting to Terrestrial Antenna Connecting to TV & VCR Connecting to Digital Audio Amplifier Connecting to PC 6 6 6 7 7 7.0 7.1 7.2 7.3 Your Receiver Front Panel Rear Panel Remote Control Unit 7 7 8 9 8.0 First Time Installation 10 9.0 9.1 9.2 9.3 9.4 9.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 3 English 1.0 Safety Instructions DO NOT INSTALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; Directly on top of or under any another equipment; On a surface which might obstruct the ventilation slots.
SRT 5005-15 ENG 1/24/06 3:41 PM Page 4 PART 1 English 2.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 5 English 3.0 Safety Precautions To maintain your receiver’s optimum performance, you are advised to apply the following safety precautions: Read this manual carefully and make sure you fully understand the instructions given. Refer all maintenance or servicing to suitably qualified personnel.
SRT 5005-15 ENG 1/26/06 10:34 AM Page 6 PART 1 English 6.0 Connection 6.1 Connecting to Terrestrial Antenna To receive the broadcast signal, the terrestrial antenna cable should be connected to the ANT IN connector at the back of the receiver. (FIGURE 1) FIGURE 1 6.2 Connecting to TV & VCR The TV set should be connected with the receiver through a SCART cable. This terrestrial receiver may also be operated together with a VCR using the loop through function.
SRT 5005-15 ENG PART 1 9/3/06 4:59 PM Page 7 English 6.3 Connecting to Digital Audio Amplifier The Digital Audio Amplifier is connected with the receiver from the S/PDIF connector. (FIGURE 3) FIGURE 3 6.4 Connecting to PC The RS-232 connector of the receiver helps to connect to the PC using a serial cable.This serial cable can be used to connect your PC with your receiver, and allows you to download new versions of software to your receiver. (FIGURE 4) FIGURE 4 7.0 Your Receiver 7.
SRT 5005-15 ENG 1/26/06 10:34 AM Page 8 PART 1 English 1. Mode indicator The RED light indicates that the receiver is in STAND-BY mode. The GREEN light indicates that the receiver is in AWAKE mode. 2. 4 Digits display 1 In STAND-BY mode indicates current time. In AWAKE mode indicates current channel number. 1 Only in models SRT 5010 and SRT 5015 7.2 Rear Panel FIGURE 6. Real Panel 1. ANT IN Use to connect a general Aerial Antenna for receiving broadcasting signal. 2.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 9 English 7.3 Remote Control Unit All features of the set-top box can be controlled with the remote control unit. A. Turns the receiver On/Standby. B. Mutes audio output of the receiver. C. AV Toggle between TV and AV mode. D. 0~9 Channel selection. E. FAV Toggle Favorite mode ON/OFF. F. TV/R Toggle between TV or RADIO mode. G. MENU Shows the main menu and exits from any level of menu to view mode. H. INFO Shows information of the current channel. I.
SRT 5005-15 ENG 1/24/06 3:41 PM Page 10 PART 1 English S. EDIT Program edit. T. TEXT Shows current service’s Teletext on OSD (On Screen Display). U. SUB Show the list of subtitled languages the current channel supports. V. RECALL Switches back to previous channel. 8.0 First Time Installation Make sure that your terrestrial receiver correctly connected to your Television and a terrestrial antenna and that the signal quality is good enough.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 11 English Please select your Country, Antenna Power mode and Channel numbering. Press UP/DOWN to select the items, press RIGHT/LEFT to change the value of the item. If you choose BACK, It will go back to SCREEN 1. Press OK to confirm those setting and enter the Adjust antenna menu (shown as SCREEN3).
SRT 5005-15 ENG 1/24/06 3:41 PM Page 12 PART 1 English 9.0 Main Menu All the important settings and features of your receiver can be operated in Main Menu. The Main Menu consists of five sub-menus such as "Channel Organiser", "Channel Search", "Installation", "Timer", "Game". With Menu off, press MENU key. The MAIN MENU screen will appear (SCREEN 5). SCREEN 5 9.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 13 English 9.1.1 Edit TV channels In this menu, you can set the favorite channels, change the order of channels and delete channels. SCREEN 7 Press UP/DOWN keys to point focus of the menu to the channel of your selection. Press LEFT/RIGHT keys to point focus of the menu to the column with the function, which you want to apply to the selected channel. When the focus is on column “Favor”, press the OK button to add selected channel to the Favourite list.
SRT 5005-15 ENG 1/24/06 3:41 PM Page 14 PART 1 English 9.2 Channel Search There are 2 items in the channel Search menu: 1. Automatic Search 2. Manual Search SCREEN 9 9.2.1 Automatic Search Press OK over the Automatic Search. A warning message will appear. SCREEN 10 Press LEFT/RIGHT to move the cursor to OK and press OK to continue. A message will appear. “Please Press LEFT/RIGHT to choose whether to erase your previous channel list”.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 15 English SCREEN 11 Then it will search for the programs automatically. If you want to cancel the channel search you may press the EXIT button. SCREEN 12 On completing the search, the receiver will save the services information automatically and exit to normal play state.
SRT 5005-15 ENG 1/24/06 3:41 PM Page 16 PART 1 English 9.2.2 Manual Search Press OK over the Manual Search, the Manual Search Screen will appear. SCREEN 14 Press LEFT/RIGHT to choose channel No. or press numerical buttons to input channel No. Or Press UP/DOWN to move focus to Frequency item and enter frequency value using numerical buttons. Press UP/DOWN to move focus to Bandwidth and choose bandwidth using LEFT/RIGHT buttons.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 17 English SCREEN 16 9.3.1.1 Language You can change the language of the OSD and Audio. Press UP/DOWN to select the OSD language or Audio language. Press OK/RIGHT to enter the language list and Press UP/DOWN to select the language. Press OK to confirm.
SRT 5005-15 ENG 1/24/06 3:41 PM Page 18 PART 1 English 9.3.1.2 TV settings You can set TV Standard, TV format, Video output and Modulator Settings. SCREEN 18 TV Standard The TV Standard Screen will appear as follows: SCREEN 19 Press OK/RIGHT to select PAL or NTSC, press OK to confirm. If you don’t know which standard your TV has, please select AUTO.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 19 English TV format The TV format Screen will appear as follows: SCREEN 20 Press OK/RIGHT to select 4:3 or 16:9, press OK to confirm. Video output The Video output Screen will appear as follows: SCREEN 21 Press OK/RIGHT to select CVBS/RGB or S-Video, press OK to confirm. Warning! If RGB is selected > S-VHS output is switched OFF totally. Note: S-Video option available in model SRT 5015 only.
SRT 5005-15 ENG 1/24/06 3:41 PM Page 20 PART 1 English Modulator Settings (only for model SRT 5015) The Modulator Settings Screen will appear as follows: SCREEN 22 Press UP/DOWN to select RF Audio Mode or RF Channel. Use LEFT/RIGHT to set RF Audio Mode and RF Channel. Press OK to confirm. 9.3.1.3 Country SCREEN 23 Press OK/RIGHT to select your country in the country list, press OK to confirm. If your country is not in the list then select Other.
SRT 5005-15 ENG PART 1 1/24/06 3:41 PM Page 21 English 9.3.1.4 Channel Numbering Here you can set the channel list by different number format, Appearing order or Operator defined. SCREEN 24 9.3.1.5 Antenna Power Press OK/RIGHT to select turn OFF or ON the antenna power, press OK to confirm. Before set Antenna Power to ON: make sure that your antenna is ACTIVE, requires power 5V DC and it’s power consumption is not more then 100 mA.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 22 PART 1 English 9.3.1.6 Time settings If a broadcaster provides GMT, you can set the time using GMT, or set your own time by yourself. If the GMT usage is ON then the Current time is set automatically or you can set the time zone. If your broadcaster provides the correct time offset then your receiver will change from summertime to wintertime automatically. If you set GMT Usage to OFF, Set Data and Set Time item are displayed.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 23 English 9.3.2 Personal Style In this menu, we can set the menu colour, transparency level, border pattern and entry animation. SCREEN 28 Press UP/DOWN to select the item, and Press LEFT/RIGHT to set the value, press OK to confirm. 9.3.3 Parental Control In this menu, you can set channel lock status (ON or OFF), the menu lock status, parental setting and change the PIN code (shown as SCREEN 29). The default PIN code is 0000.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 24 PART 1 English 9.3.3.1 Channel Lock Set the system channel lock to ON or OFF. If the channel locks on, user has to enter the parental PIN code correctly before watch the locked program. SCREEN 30 9.3.3.2 Menu Lock Press OK to select whether you need the lock or not for the Menu, YES or NO, press OK to confirm. If the menu lock is on, then for some operations such as search program and set factory default, you need to enter your PIN.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 25 English 9.3.3.3 Parental setting Set some programs to lock status. If a channel is locked, the user has to enter the parental PIN code correctly before watching the locked channel. SCREEN 32 Use UP/DOWN keys to select channel which you want to lock. Press OK button to lock channel. 9.3.3.4 Change PIN Modifying the password.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 26 PART 1 English 9.3.4 System Information Display the software version information. Press OK/EXIT keys to return. SCREEN 34 9.3.5 System Update In this menu, you can select between “STB to STB” and “OAD”. 9.3.5.1 Update through STB to STB The System Update screen will appear. SCREEN 35 When it is necessary to update the System, please follow these steps: a) First power off both STBs, connect them with cross RS 232.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 27 English 9.3.5.2 Over Air Download (OAD) Select this option in order to update your receiver with the latest software version. The receiver will check availability of the software update on air and load the latest software, if available. You will be asked to confirm update. Do not switch power off and do not disconnect the receiver from the aerial during update process.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 28 PART 1 English 9.4 Timer You can set the timer to make the receiver perform designated actions including timer based wake up/sleep the set-top-box. SCREEN 36 Use UP/DOWN buttons to select timer. Press LEFT/RIGHT key to activate/inactivate current timer. Press OK button to enter selected timer settings. Action: You can select the following functions: “Power On”: The receiver powers on at the designated date and time.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 29 English 9.5 Game The receiver has three games (Mine, Tetris and Gomoku) and calendar. In this menu user can select any game item and press OK to play the game. Or you can press GAME key on normal play state into the game menu directly. SCREEN 38 9.5.1 Mine SCREEN 39 Key function: UP/ DOWN/ LEFT/ RIGHT button: Move the cursor. MENU button: Make Mark to the mine.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 30 PART 1 9.5.2 Tetris SCREEN 40 Key function: LEFT/RIGHT: Move block to left or right direction. DOWN: drop block. UP: Rotate block. 9.5.3 Gomoku SCREEN 41 Key function: UP/DOWN/LEFT/RIGHT: Move the cursor. OK: Place the gobang.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 31 English 9.5.4 Calendar UP/DOWN: +/- months. LEFT/RIGHT: +/- years the range from 1900 to 2100. SCREEN 42 10.0 Other operations 10.1 Mosaic In no-menu state, press MOSAIC button. Screen will be divided into nine pictures screen: SCREEN 43 Press UP/DOWN/LEFT/RIGHT keys to choose one of current programs. Press P+/P- keys to view another nine programs. Press OK key to return to normal play state and play the selected program.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 32 PART 1 10.2 EPG function In no-menu state, press EPG, EPG Menu will appear: SCREEN 44 Press UP/DOWN to choose channel. Press RIGHT into EPG schedules of current channel. SCREEN 45 In EPG schedules menu: Press UP/DOWN keys to choose schedule items. Press P+/P- into next/previous day schedules. Press LEFT/EXIT return to EPG Menu. Press OK/RIGHT to show the details of this item.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 33 English SCREEN 46 In EPG schedule details: Press P+/P- into next/previous page. Press LEFT/EXIT return to EPG schedule Menu. You can set up the event timer by pressing OK in EPG schedule details or EPG schedule screen. To set up an event timer: 1.Press UP/DOWN to move the cursor to the event for which you want to add a timer. 2.Press OK to add a timer. SCREEN 47 shows you current event timer information based on the event you have chosen.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 34 PART 1 10.3 Teletext function In no-menu state, press TEXT. SCREEN 48 In TEXT on OSD: Press UP/DOWN to add/ subtract displayed page number Press NUMERIC keys to input page directly.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 35 English 10.4 Information The following screen will be shown when you press INFO key twice times in the no-menu state. The screen will show you current channel information.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 36 PART 1 English A.1 Trouble Shooting Before requesting servicing for your receiver, please check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your behalf may eliminate the problem and restore proper operation. The most common problems that arise are related to cable connections. Make sure that your decoder is properly connected.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 37 English The standby indicator on the receiver’s front panel is red Your receiver is in standby, press the power button on your remote control. Your remote control fails to operate your receiver Check the batteries in your remote control. Make sure your receiver is in the operate mode. Make sure that you are pointing your remote control at the receiver’s front panel. Make sure that there is no direct sunlight from behind your receiver.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 38 PART 1 A.2 Specifications 1. Tuner & Channel for Terrestrial Type Frequency Range Bandwidth Input impedance Signal Level IEC 169-2 Female VHF and UHF 8 MHz or 7 MHz or 6 MHz 75 ohm unbalanced -82 ~ -20 dBm 2. Demodulation Waveform Constellation Transmission mode Guard Interval Code Rate COFDM 16 QAM, 64 QAM 2K, 8K 1/4, 1/8, 1/16, 1/32 1/2, 2/3, 3/4, 5/6, 7/8 3.
SRT 5005-15 ENG PART 1 1/24/06 3:42 PM Page 39 English 6. Power Supply Input Voltage Power Consumption Stand-by Power 90 – 240 V AC, 50/60 Hz +/-5 % Max. 20 W <= 8 W 7. Physical Specification Size (W x H x D) Weight 260 x 40 x 140 mm 1.2 kg 8.
SRT 5005-15 ENG 1/24/06 3:42 PM Page 40 PART 1 English A.3 Glossary of terms DVB-T Digital Video Broadcasting Terrestrial - Digital TV via antenna (same as DTT- Digital Terrestrial Television). EPG Electronic program guides that are transmitted by some broadcasters to display information guide about a program content. MPEG The Moving Picture Experts Group is founded by the ISO. MPEG is a standard method fordigital transmission of video and audio.
Environmental Issues Environmental Issues Strong is committed to reducing the impact of its products on the environment. To maximise the benefits of our design enhancements, your co-operation is required. Electronic product recycling Do not dispose of this product with your domestic rubbish At the end of its useful life, this product contains materials which when processed correctly can be recovered and recycled.
