Operation Manual

www.strongsat.com

Use following device keys:

for your TELEVISION,

for your VIDEO RECORDER,

for your DVD-PLAYER,

for your SATELLITE RECEIVER – default setting for

STRONG SRT 6125, 6155, 6355

for your second device: SATELLITE RECEIVER / CABLE BOX

3. Press the key again, and then the LED should start blinking which

means your remote is in code search mode.

4. Press the key on remote and check if your device (e.g. TV) switches

OFF. Continue pressing this button slowly with intervals of about 2

seconds between each press until the device is switched OFF.

5. If it switches OFF, press the appropriate device key (e.g. ). LED light will

turn OFF now. Your device code for the selected device is now stored.

6. Aim the remote control at the selected device and press the key.

Your remote control is set up correctly if the device switches ON;

e.g. VOLUME -/+ or e.g. at VCR/DVD-Player: key can be operated.

7. If the selected devices operated incorrectly, repeat step 2 to step 6.

Note: If a key is not pressed within 30 seconds in the search mode, the

remote will stop the search.

Identifying CODE numbers – from the automatic search:

1. Press the key on the remote control. Now press both & key

and release.

Note: If the LED does not blink at all, the corresponding code for the rst

digit is 0.

2. Count the number of times the LED blinks and record this number.

3. Continue by pressing & and count the number of times the LED

blinks then record this number. For the second digit.

4. Continue by pressing & and count the number of times the

LED blinks then record this number for the third digit. You have now

identied the 3-digit code from the search.

Example: Key does not blink at all, it means the 1st digit of the code

number is [0], key blinking twice means 2nd digit is [2], key

blinking 8 times means 3rd digit is [8], therefore the code

number is 028.

If you think that the searching process is too slow, you can advance the

database searching process by pressing button.

Your Code Numbers

For future reference please record your CODE numbers in the elds for your

devices:

TV VCR DVD-Player STB 1 STB 2