Product Manual

7141 Paramount Blvd, Pico Rivera, CA 90660 U.S.A. | www.stronghandtools.com
Toll Free : 800.989.5244 | Tel : [phone] | [e-mail]
» Tools required for assembly : wrenches, phillips screwdriver and pliers.
Installing Connector Plate for Extended Table Assembly
Join two standard Nomad Welding Tables
(Part No. TS3020) with one Nomad
Connector Plate (Part No. TSL30) to
create a 90" L x 20" D Welding Table to
work on large projects, or multiple
projects.
Hold the Nomad Connector Plate against
the 20" side of one fully assembled
Nomad Table. Align mounting holes on
the Nomad Table and Connector Plate.
Fasten the Connector Plate to the Table
using two of each: 6 mm screws, spring
lock washers, and plain washers. [place
spring lock washer on the screw first,
then plain washer] Fasten the other side
of the Connector Plate to the second fully
assembled Nomad Table using the
remaining 6 mm screws, spring lock
washers and plain washers.
Front
MagSpring Clamps x 2 Multi-Angle Magnets Adj. Magnetic V-Pads x 2
Hold stock at
accurate multiple
angles while
soldering brazing,
and welding at:
30º, 45º, 60º, 90º.
Light Duty and Tight Spot Holding!
Center hole
makes it easy to
handle and
remove magnets.
Mini x 1
Standard x 1
2-5/16”
5-1/2”
2”
4-3/8”
Back
The Spring-loaded Clamp with quick-set
magnetic V-Pad!
Quick and Easy to
Use! Squeeze to
open, Set in place,
Turn T-Handle to
tighten.
The Adjustable
Magnetic V-Pad
instantly adjusts for
different shapes:
round, flat, and
angled steel.
Hold and position
round, flat, square,
and angled stock in
light duty substructure
applications.
V-Pads contain strong
rare earth disc
magnets. Hold tabs,
or small metal pieces
or plates. Use as a
rest for round stock.
Ideal for use in tight
spots, or for holding
at add angles.
Nomad 6 pc. Clamping Kit
The Nomad 6 pc. Clamping Kit included with the Extended Nomad Table Assembly contains essential
tools for setting-up, postioning, locating, and clamping stock before tack welding.
Nomad Extended Table Assembly Instructions
Part No. 37898-2456