User's Manual

3. GETTING STARTED
How it works
Pressure and temperature information are sent to the Receiver and displayed on the LCD display. When an
under-inflated or over-heated tire is detected, the Receiver will emit an audible warning and activate the
backlight to warn the driver. The alerts depend on threshold value set for pressure and temperature. Either the
factory or manual preset value can be selected.
Handling Alerts
When any of the tire is not within the threshold limits (e.g. under inflated or over heated, the following will
occur:
• An audible warning will be activated for a period of 10 seconds at an interval of 7 minutes.
• The backlight of the LCD display would be activated for 25 seconds at the first occurrence.
• The pressure value and/or temperature value on the display will blink at twice the normal rate. Likewise
for the affected tire icon.
The above will continue until the threshold returns to their corresponding preset value.
All TPMS unit comes with a factory-preset value of 160 kPa (23 psi) for the Low Pressure Alert and factory
preset value of 80ºC (176ºF) for theHigh Temperature Alert.
Left Front Tire Select.
Decrement Value
Confirm Value
Increment Value
Temperature Unit Select
Power Supply
ON/OFF Switch.
Pressure Unit Select
ID Exchange/Learning
Select
Auto/Manual Display
Select
Right Front Tire Select
Left Rear Tire Select.
Ri
g
ht Rear Tire Select
Figure 1 Display/Receiver Module
Page 5