Picture similar Digital Free-To-Air Satellite Receiver SRT 60 User Manual
TABLE OF CONTENTS 1.0 SAFETY INSTRUCTIONS 1.1 Equipment Set-up 1.2 Features and accessories 2 6 6 2.0 CONNECTION 7 3.0 REMOTE CONTROL 7 4.0 GETTING STARTED 4.1 Connecting to TV Set and Switching-On 4.2 First Time Installation 8 8 8 5.0 MAIN MENU 5.1 Channel Manager 5.2 Program Guide 5.3 Timer 5.4 User Installation 5.5 Receiver Information 9 10 10 10 11 13 6.0 OPERATION 6.1 Standby/Power button 6.2 Changing Channels 6.3 Volume Control 6.4 Language Selection 6.5 Audio Mode 6.
1.0 SAFETY INSTRUCTIONS TO REDUCE THE RISK OF FIRE AND ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE FOR SERVICING. CAUTION: To reduce the risk of fire and electric shock, do not remove the cover (or back) of the unit. Refer servicing only to qualified service personnel.
INSTALLATION 1. Read and Follow Instructions - All the safety and operation instructions should be read before the product is operated. Follow all operating instructions. 2. Save Instructions – Save all safety and operating instructions for future reference. 3. Heed Warnings – Read carefully and follow all warning labels on the product and those described in the instructions. 4.
by the manufacturer’ or sold with the product. Any mounting of the product should follow the manufacturer’s instructions and use of a mounting accessory recommended by the manufacturer. 11a.A product and card combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the product and cart combination to overturn. Note to CATV system installer.
E. If the product has been dropped or cabinet has been damaged. F. When the product exhibits a distinct change in performance-this indicates a need for service. 19. Replacement Parts - When replacement parts are required, have the service technician verify that the replacements he uses have the same safety characteristics as the original parts. Use of replacements specified by the product manufacturer can prevent fire, electric shock, or other hazards. 20.
SERVICING: LIGHTNING: GROUNDING: NOTE: Do not attempt to service this product yourself. Any attempt to do so will make the warranty invalid. Refer all servicing to a qualified service agent. If the receiver is installed in an area subject to intense lightning activity, protection devices for the receiver mains connector and modem telephone line are essential. The individual manufacturer’s instruction for safeguarding other equipment, such as TV set, Hi-Fi, etc.
n n n n n User-friendly Remote Control Low power consumption Automatic and manual channel scan options 12 V mains supply for usage with camping caravans or houseboats (Car cigarette lighter adapter optional) Connections: SAT IN, IR-Eye, Power Supply *subject to local signal conditions Accessories: n Remote control n IR-Eye n SCART Cable n Power adaptor 230V AC to 12V DC / 2A 2.0 CONNECTION 1. 2. 3. 4. SAT IN - Connection for satellite antenna. IR IN – Connection for remote control IR-eye.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21.
4.2.1 Language Selection Select the language of your choice with Up/Down buttons and press OK to confirm. The SET UP WIZARD menu will appear. It describes functional buttons that you should use during installation. Once you read information press OK button to continue. 4.2.2 Satellite Selection The Installation Wizard preconfigured for easy installation of Astra 19.2°E or Hotbird 13°E. For these satellites LNB configuration is predefined as Universal LNB connected to the receiver via DiSEqC 1.0 switch input 1.
5.1 Channel Manager For building favourite groups, moving, locking or deleting channels. 1. Press the MENU button to enter the “Main Page”. 2. Use UP/DOWN buttons to select “Channel Manager” and press OK. 3. Use UP/DOWN buttons to select “TV channels” or ”Radio channels” for modifying one of this lists. Press OK to confirm. 4. Press the RED “Delete” button to delete channels. Use UP/DOWN buttons to select a channel to delete and press OK to confirm (you can reverse the confirmation if you press OK once again).
5.3.1 Time Adjust For setting time and date: 1. Use UP/DOWN buttons to select. 2. Use LEFT/RIGHT, OK and UP/DOWN, or Numeric keypad to change settings. 3. Press EXIT button to quit and save Setting. 5.3.2 Time Reservation In this menu you can program a timer to switch to a certain channel at the desired time. Available repeatrates are: One Time, Daily, Weekly or Monthly. Use UP/DOWN buttons to select. 1. Use LEFT/RIGHT, OK and UP/DOWN, or Numeric keypad to change settings. 2.
n Transponder: Here it is possible to select a stored transponder from the chosen satellite. This is necessary if you only wish to search for a certain transponder. You can also edit a new transponder here. Press OK and select “NewTP” in the list. Now the values for Frequency, Symbol Rate and Polarization are editable. The new Transponder will be added in the end of the list.
n n n n activate it by pressing the the yellow SUB button and choose one of the provided languages. Screen Format: You can choose between following formats: 4:3, 16:9 and 4:3 Letterbox. Video Output: You can select the output signal at the scart plug between RGB and CVBS. TV Type: To select the video standard: PAL or NTSC. Start On Channel: Press OK button to select the channel which should be shown every time you switch on the receiver.
6.0 OPERATION 6.1 Standby/Power button Press STANDBY/POWER button, to switch ON your receiver. If you press STANDBY/POWER button again it is set to Standby mode. 6.2 Changing Channels 1. Stepping through the channel list: To move through the channel list, press the CH- / CH+ (UP/DOWN) keys on the remote control. 2. Selection by on-screen channel list: Press OK on your remote to select the required channel directly from on screen channel list. n Press UP/DOWN buttons to select channel step by step.
6.8 Subtitle n n Press YELLOW “SUB” button to switch on subtitle support. Press EXIT to leave the subtitle function. 6.9 Displaying program information You can read the current program information if you press the INFO button (or OK button twice) on the remote control. n Press RED button for EPG Details of the running program. The info will disappear after 5 sec. or after pressing INFO button again. n Press GREEN button to show detailed signal information. The info will disappear after 5 sec.
No picture or sound -Tuned to digital teletext channel -Reduce to another channel -Bad reception -Check Signal -Channel has changed Transponder or Audio/Video data values -Check according to satellite service or at www.strong.
Audio Decoder MPEG Audio Layer I & II (MusiCam) Sampling rate: 32, 44.1 and 48 KHz Audio modes: Stereo, Joint Stereo, Mono, Dual Mono Tuner Input Frequency Range: Input Signal Level: Input Connector: Input Impedance: LNB Supply: LNB band Control: DiSEqC Control: 950 ~ 2150 MHz -25 ~ -65 dBm F Type 75 Ohm unbalanced 14.0 / 19.0 V (max. 350 mA) Frequency: 22 ± 4 KHz Amplitude: 0.6 ± 0.2 V Version 1.
A.3 ENVIRONMENTAL ISSUES Strong is committed to reducing the impact of its products on the environment. To maximise the benefits of our design enhancements, your co-operation is required. Electronic product recycling Do not dispose of this product with your domestic rubbish. At the end of its useful life, this product contains materials which when processed correctly can be recovered and recycled.