User's Manual Part 4

Access / One
®
Network
Managing Modules 147
7
Radio Parameters
This command is similar to the Radio Parameters command used at the network
level, but with fields that are relevant only to the selected wireless module. To avoid
confusion, the page generated by this command will be documented here in full. All
changes made to this page will be applied only to the module you are currently
logged in to (not to the entire network).
Strix Systems complies with FCC requirements for both DFS (Dynamic Frequency
Selection) and TPC (Transmitter Power Control).
Figure 115 shows an example of the Radio Parameters configuration page for
802.11a radios operating in the 5.250 Ghz to 5.350 GHz, 5.470 GHz to 5.725
GHz, and 5.745 GHz to 5.825 GHz wireless bands.
Figure 115. 802.11a Radio Parameters