Quick Start Guide

MWS100 Installation Guide Page 2 of 5 Revision D3
4/14/2008
2
Front Panel Indicators
PWR LED – This indicator displays the
status of the MWS100 power source. It
will illuminate when power is applied top
the unit.
SIG LED – This indicator displays the
operational status of the MWS100 radios. Rapid
blinking (4 blinks per second) indicates that the
radios are beginning operation (rebooting). Slow
blinking (once per second) indicates that the
OWS100 Station radio is seeking a signal from a
Strix OWS Access Point. A sequence of two or
more slow blinks indicates that a connection with
a Strix OWS access point has been achieved,
then the relative signal strength (2 blinks
indicates low signal strength, 5 blinks indicates
high signal strength).