User's Manual

EWS-150g Configuration Guide 13
EWS-150g Configuration Guide
8. If you want to use a shared Client Connect key (or multiple shared keys), click on the button
corresponding to the shared key you want to define (1 through 4) to generate the key entry pop-up
window, then choose either 64 bit, 128 bit or 152 bit encryption. After choosing the encryption type,
enter the key then click on the Update button.
Figure 12. Defining a Shared Key
The shared key you entered is displayed as coded black dots in the corresponding Encryption Key
field. You can enter up to 4 shared keys.
9. When finished, click on Update to apply your changes then click on Reboot to reboot the EWS-100.
Only after the unit reboots will these changes take effect.