User's Manual

8 EWS-150g Configuration Guide
EWS-150g Configuration Guide
Setting Up the System Management Options
The EWS-150g can be managed from any of the following management options:
◗ Web—from your Web browser using its embedded Web Management Interface (WMI).
◗ LAN—This option allows you to manage the EWS-150g using either Web, Telnet or SNMP with a direct
connection from the unit’s LAN port.
◗ SNMP—Allows management via an SNMP (Simple Network Management Protocol) management
console. The EWS-150g supports the 802.11 MIB (Management Information Base), as well as Strix
proprietary MIBs. Any MIB I or MIB II compliant SNMP management console (such as HP OpenView)
can be used to manage the unit.
To set up the system management options, click on the Configure tab then click on Management to display
the Management window.
Figure 8. Management Window
Enable or disable your preferred system management options, as desired. If you enable the Telnet option you
must also provide the Telnet timeout (in seconds)—the default is 180. If you enable SNMP management, you
must also provide the SNMP communities you are using and the system contact information. When finished,
click on Update to apply your changes then click on Reboot to reboot the EWS-150g. Only after the unit
reboots will you be able to manage the EWS-150g from any of the selected management options.