User's Guide

Q- Can I readily add another Network Node after the initial system has already
been installed?
A- Yes. Should you need to add a Network Node – or Network Server – at any time, you
just plug it in, and the Node will configure itself.
Q- Can I add a Network Server to any Network Node?
A- Yes. This is as simple as unplugging the Network Node from the power source, placing
the physical Network Server Module within the Node, and reapplying power to the
Node.
Q- Can I install a single Network Node or several Network Nodes without a
Network Server? If so, what features do I sacrifice?
A- The Access/One Network cannot operate without a Network Server being present
somewhere in the network. There must be at least one Network Server in the
Access/One Network for it to function.
A single Network Server is needed for every eight (8) Network Nodes in the
Access/One Network, regardless of the RF technology is being used (802.11 or
Bluetooth). This rule applies whether the Network Nodes communicate with the
Network Server via wired Ethernet or wireless 802.11a.
63