User's Guide

bc shownodes
bc showdevices
bc sendcfg cloud
bc sendcfg subcloud <id>
bc imageload cloud
bc imageload subcloud <id>
bc pagerenable cloud
bc pagerenable subcloud <id>
bc pagerdisable cloud
bc pagerdisable subcloud <id>
bc reboot cloud
bc reboot subcloud <id>
bc setview cloud
bc setview subcloud <id>
bc setview device <ipaddr>
bc include all
bc include devices <ipaddr>
bc exclude all
bc exclude devices <ipaddr>
bc changestname <ipaddr> <name>
bc help
ftransfer params set …
hostname <hostname>
username <username>
password <password>
path <path>
filename <remotefile>
ftransfer params get
ftransfer download image <remotefile>
ftransfer download configuration
<remotefile>
ftransfer restore image
ftransfer restore configuration
ftransfer upload image current
<remotefile>
ftransfer upload image backup
<remotefile>ftransfer upload
configuration current <remotefile>
ftransfer upload configuration backup
<remotefile>
ftransfer help
get cims
-Show nodes in cloud
-Show devices in cloud
-Send cloud configuration
-Send sub-cloud
-Load image on cloud
-Load image on sub-cloud
-Set pager on for cloud
-Set pager on for sub-cloud
-Set pager off for cloud
-Set pager off for sub-cloud
-Reboot cloud
-Reboot sub-cloud
-Cloud view
-Sub-cloud view
-Device view
-Include all devices
-Include specified devices
-Exclude all devices
-Exclude specified devices
-Change station name
-Batch configuration help
-Set ftp parameters
-Get ftp parameters
-Download image file
-Download configuration file
-Restore previous image
-Restore previous configuration
-Upload current image
-Upload backup image
-Upload current configuration
-Upload backup configuration
-File transfer help
-Display Cloud structure
get config
get dhcp mode
get domainsuffix
get fan
get gateway
get hardware
get hostipaddr
get ipaddr
get ipmask
get login
get nameaddr
get cloudname
get subcloudname
get stackid
get outdoorenviron
get radiusname
get radiusport
get snmp
get sntpserver
get syslog settings
get syslog consoledump
get syslog filedump
get syslog help
get system
get telnet
get temperature
get timeout
get tzone
get uptime
get voltage
help
ping
quit
rawftp
reboot
remotenc add
remotenc remove
remotenc show
run
set cloudname
set dhcp disable
set dhcp enable
- Display Current System Configuration
- Display DHCP mode
- Display Domain Name Server suffix
- Display the fan status
- Display Gateway IP Address
- Display Hardware Revisions
-Display Host IP Address
- Display IP Address
- Display IP Subnet Mask
- Display Login User Name
- Display IP address of name server
- Display Cloud Name
- Display Subcloud Name
- Display Stack Id
- Display outdoor environment
- Display RADIUS server name or IP address
- Display RADIUS port number
- Display SNMP Community Name
- Display SNTP/NTP Server IP address
- Get syslog configuration settings
- Dump syslog console buffer contents
- Dump syslog file contents
- Syslog get help
- Display System Name
- Display Telnet Mode
- Display the unit's ambient temperature
- Display Telnet Timeout
- Display Time Zone Settin
- Display UpTime
- Display the voltage sources
- Display CLI Command List
- Ping
- Logoff
- Software update via FTP
- Reboot Access/One
-Add remote network server IP address
-Remove remote network server IP address
-Show remote network server IP address
-Run command file
-Set cloud name
-Disable DHCP
-Enable DHCP
set domainsuffix
set factorydefault
set snmp getcmnty
set snmp setcmnty
set gateway
set hostipaddr
set ipaddr
set ipmask
set login
set nameaddress
primary
set nameaddress
secondary
set outdoorenviron
disable
set outdoorenviron
enable
set pager off
set pager on
set password
set radiusname
set radiusport
set radiussecret
set sntpserver
set syslog server
set syslog console
set syslog file
set syslog help
set system name
set system contact
set system location
set telnet disable
set telnet enable
set timeout
set tzone
timeofday
version
-Set Domain Name Server suffix
-Restore to default factory settings
-Set SNMP community
-Get SNMP community
-Set Gateway IP address
-Set Host IP address
-Set IP address
-Set IP subnet mask
-Modify Login user name
-Set primary name server IP address
-Set secondary name server IP address
-Disable outdoor environment
-Enable outdoor environment
-Module LED returns to current state
- Module LED repeats Red, Green,
Orange sequence
- Modify Password
- Set RADIUS name or IP address
- Set RADIUS port number
- Set RADIUS shared secret
- Set SNTP/NTP Server IP Address
- Syslog server configuration
- Syslog console configuration
- Syslog file configuration
- Syslog set help
- Set System Name
- Set System Contact
- Set System Location
- Disable Telnet access
- Enable Telnet access
- Set Telnet timeout
- Set time zone setting
- Display current time of day
- Software version
53