User's Guide

USER GUIDE
WIFI ACL
This window configures an Access Control List (ACL) determining which user devices (stations)
are allowed to connect to Access/One Network.
Access Control List: Enables you to enable or deny network access based on the
MAC address of a user device (station).
o Disable: All stations can request association with a Network Node in the
Access/One Network. This means that the ACL will not be checked when a
station attempts to authenticate.
o Enable: Stations are assigned a DENY or ALLOW permission status. If the
MAC address of station trying to gain access is set to DENY, it will not be
allowed to associate with the network. If the MAC address is set to ALLOW, or
not configured in the ACL, the station will be allowed network access.
o Strict: Only stations assigned ALLOW permissions in the ACL will be granted
access to the network, regardless of encryption settings. In addition, if the entry
is configured for an encryption key, the station is also required to match that
key before gaining access. If no ACL entry exists for a MAC address it will not
be allowed to associate with the network. The ACL will accept multiple levels of
authentication (ALLOW, KEY, DENY) concurrently so that stations with or
without encryption (or shared key authentication) can be admitted.
34