User's Guide

USER GUIDE
BLUETOOTH
This window defines the network settings for Bluetooth.
• Mobile Device Start IP Address: Enter the starting IP address for mobile Bluetooth
devices. This is the beginning address of the address pool from which all user device IP
addresses will be assigned. The mobile device IP address pool consists of the next
twenty (20) IP addresses starting from the Start IP address. Other Bluetooth devices
should not use this pool of 20 IP addresses.
• Enable Bluetooth Roaming: When enabled, Bluetooth user devices can freely move
throughout the Access/One Network coverage area, between Network Nodes, without
loosing connection to the network. The connection/association is seamlessly handed
over from one Network Node to another without affecting user experience.
• Cloud BD Address: This is an address to be used by all Bluetooth users to connect to
Access/One Network. This single address represents all Bluetooth Wireless Modules in
the Access/One Network, so that user devices do not have to be reconfigured while
roaming throughout the Access/One Network coverage area.
Note: The last two features require the Bluetooth Mobility Software option to be loaded,
which must be purchased separately.
Click the ‘Update’ button at the bottom of the page to save any changes made to the settings in
this page. Click the ‘Apply Configuration’ tab to make the configuration information active in
the Access/One Network cloud.
29