User's Guide

USER GUIDE
• IP Address: Enter the IP address of a Network Server Module on another subnet.
• Subnet Mask: Enter the subnet mask of the Network Server Module on another
subnet.
Click the ‘Update’ button to save any changes made to the settings in this page. The listed
Network Server will be added to the internal list as a Network Server that is available on another
subnet, and the IP Address field will clear. Multiple Network Server IP addresses can be added.
When you have finished adding Network Servers click the ‘Apply Configuration’ tab to make
the configuration information active in the Access/One Network cloud.
WIFI
The Wi-Fi network settings can be configured from this window, including SSID, SSID
parameters, and 802.11a and 802.11g Wireless options.
• SSID: This field defines the identifier of the Service Set to which all the Access/One
Network Wireless Modules belong. User devices must provide this SSID to connect to
Access/One Network. You may enter an alphanumeric string that is between 1 and 32
characters in length that user devices will associate with in Infrastructure mode. If you
want to assign a unique SSID to a specific Wireless Module, drill down to the module
itself and update the System Name field to set a unique SSID for the device.
24