User's Guide

USER GUIDE
NODE STATUS
Selecting any Node listed on the network view will update a frame on the left side of the
window showing the Node’s status and its components. You may close this frame at any time
by selecting the “<<” button on the line separating the frames.
This frame shows all the Node components, their
roles, IP addresses and status. Double-clicking on
one of the modules takes you directly to the
management screen for that module and opens a
new Manager/One window with module-level
commands and screens similar to the ones
available for the network configuration. Use this
utility to monitor and manage the module itself,
and to perform module-specific configurations
such as setting a unique SSID, etc.
Note: For module-specific Manager/One capabilities please refer to Appendix 1. It is generally
sufficient to configure the network as a whole without configuring specific modules or Nodes.
When a specific device is configured (as outlined in Appendix 1), the manually configured
parameters override the global network parameters configured or defaulted at the network
(cloud) level. It is presumed that if a module is manually configured, the configured parameter
values take precedence over global values.
20