User's Guide

USER GUIDE
REBOOT NETWORK
The ‘Reboot Network’ command will reboot each of the modules in all of the Nodes within the
Access/One Network. This is required when network-level configuration changes are made or a
new image is loaded. The Network Server will generate the request in stages in order to monitor
the progress of the network reboot. Once each module reports receiving the reboot command
and successfully reboots (monitor by pressing ‘View Active Status’), the Network Server will
perform a final self-reboot.
UPDATE NAMES
Each Network Node has an editable text field beneath the Node image showing the Node’s
current name (default is the Base Module serial number). A Node name can be up to 15
characters in length & any alphanumeric character may be used. The Node name must be
unique within the wireless network. A duplicate name will cause Manager/One to prompt for a
new name. Changes to Node names are applied using the ‘Update Names’ command. A name
update does not require a reboot, but may take 10-15 seconds before the change is reported.
Refresh the browser window frequently to display the latest network information.
Node Name
17