Owner's Manual

www. StriderBikes.com
©2022 Strider Sports Int’l, Inc. All Rights Reserved.
11240-C Universal Owner’s Manual
3
Fastener Torque Specifica�ons
Item Size Torque (N-m)
14x Stem and Seat Binder Clamp Bolt M6 4.6
20x Quill Stem Bolt M8 20
Wheel Axle Nuts M10 22
Rear Stay Guard Moun�ng Screw M5 2.7
14x Footrest Bolt M8 20
20x Footrest Bolt
M6
20
14x Handlebar Clamp Bolt
M8
20
20x Stem Faceplate Bolts
M8
20
Rear Brake Arm Bolt/Nut M5 2.7
Rear Brake Cable Clamp Bolt/Nut M6 10
Front Brake Center Mount Bolt/Nut M6 10
Front Brake Pad Nuts M6 10
Front Brake Cable Clamp Bolt/Nut M6 10
Brake Lever to Handlebar Bolts M6 2.9
14x Saddle to Seatpost Bolt/Nut Moun�ng Bolt M6 4
20x Saddle to Seatpost Bolt/Nut Moun�ng Bolt
M6
20
Strider Bikes are not designed to be used in conjunction with any type of stabilizer system.
ASSEMBLY
When putting your Strider bike together, refer to assembly guide.
CHAIN MAINTENANCE
The chain should be lubricated with light oil at least every month, or after use in wet, muddy, or dusty conditions.
Take care to wipe off excess oil, and not to get oil on tires or rim braking surfaces.
When correctly adjusted, the chain should have approximately 10mm of vertical movement when checked in the
center between the chainwheel and rear sprocket. Center the wheel in the frame and re-tighten the axle nut after
adjustment.
Chains require a special tool to fit and remove chain links or to change the length. We recommend that you go to a
local bicycle mechanic to replace or change the length of your chain.
Strider bikes do not have gears.