User Manual

3. Installation guide

off test on

MICRO SD

shot

REPLAY

Battery installation

Open the battery cover and insert 8* AA batteries. Make

sure the batteries are correctly placed (pos+ / neg-)

Do not insert any batteries when using a DC power adapter.

This will cause permanent damage to the camera!

Enter TEST mode

Slide the mode switch to “TEST” to activate the camera and

view the setup screen. While in TEST mode you are able to

change all settings to the desired settings and also view

previous recordings.

Enter ON mode

After you have completed all settings slide the mode switch

to “ON” to enter working mode. The screen will countdown

10 seconds and then go black. The camera is now in auto

working mode and will start taking photos and videos

based on the congured settings immediately.

Memory card installation

Insert the micro SD memory card in the designated slot

with the contacts (gold plating) facing away. The micro SD

card should slide in freely with little resistance. Continue

pressing the card inward until you hear a click. The

microSD card is now locked in place and ready for use.

Adjust desired settings

While in the “TEST” modus click the “MENU” button. While

in the menu you can congure all options to your desired

settings. See the chapter “Settings” for all available options.