STREX LED PROJECTOR Instruction manual SP212 Thanks for choosing Strex! Read the manual carefully, for correct and safe operation of the product. Always follow these instructions for safe usage. English If you have any questions about the product or encounter problems,you can contact us by email: info@strex.
SAFETY PRECAUTIONS Read these safety instructions before using your device and store them for possible future reference. If the cord is damaged, have it repaired by the manufacturer, it’s service or a similarly qualified person in order to avoid any hazard. The cord should always be readily accessible. The apparatus shall not be exposed to dripping or splashing of water or liquids and that no objects filled with liquids such as flowers vases shall be placed on the product.
ACCESSORIES Only use batteries, chargers and other accessories which are compatible with this equipment. Do not connect incompatible products. CONTENTS ► VISUAL INSTRUCTIONS..........................................................................................03 • Top View...................................................................................................................... 03 • Bottom View..................................................................................................
► VISUAL INSTRUCTIONS • Top View Control Panel Keystone Correction knob Manual Focus The content of this manual are subject to change without notice -3-
• Control Panel Power / Return Indicator Light Menu / Up Right / Volume - Left / Volume + OK Button ( Select/confirm/enter) Source / Down • Bottom View Support Base thread ❷ ❶ ❶❷ -- For Ceiling Mount The content of this manual are subject to change without notice -4-
Remark: The adjustable support base can assure the max projection angle by 15°, The best display effect will be obtained by projection angle ranges of 0° - 8°. • Front View IR Receiver Lens • Side View A.
B. Right Side ❶ ❷ ❸ ❹ ❺ ❿ • Rear View ❻ ❼ ❽ ❾ ❶ AV Input ❷ Headphone Output ( 3.5mm ) ❸ HDMI 1 Input ❹ HDMI 2 Input ❺ USB ( 2.
• Remote Control Power Button Backward Arrow Keys Mute Forward Home / Play Enter Source Menu Return Voice - Voice + Note: While using the remote control, point it toward IR receiver. Installation And Mounting Before using your device, select an appropriate spot for the projector, Brightness of the room is crucial to quality of the image projected, Reduce the external brightness Follow instructions and hints below for optimum usage.
► Projection Distance and Size 120˝ 100˝ 72˝ 50˝ ( Aspect Ratio: 16 : 9, Default ) Please follow the data in chart below, to adjust the image size and the distance. Distance provided is measured from lens to projected surface. Projection size 50 inch 72 inch 100 inch 120 inch 16 : 9 1.50 m 2.10 m 2.90 m 3.35 m The image size depends on the distance between projector and screen, there may be 3% deviation among above listed data. Different settings cause various distances.
► How to Use ① Before starting up the projector. Follow figure below to adjust trapezoid ． same level. , correction. Keep the projector vertical with projector screen and keep it on the I I ｀ I I For Ceiling Mount : Select display image rotation, options available are : front (on desk), rear, front / ceiling, rear / ceiling, see picture below: Before that. You needs compatible mount, and for rear projection, it required a special projection screen.
② Connect the power plug as following picture, connect with the electricity, The indicator light will turn to red. Note: Pictures are only for your reference, different countries got different power plug, please contact your supplier for more details, better connect the projector first.
③ Connect the power cable to the projector and into the power supply socket, the indicator light will turn red, then the projector is in standby mode, take off the lens cover. Press the “ power ” button ( ) on the control panel or remote control to turn on the projector. A. On the control panel B.
④ Keystone and Focus Keystone Correction Manual Focus A. If the projected image is in a trapezoidal shape, it can be resolved by Keystone correction. ( Do Manual Keystone Correction ) Note: If the Keystone correction fail to resolve image shape, please reduce the vertical height of the projector in relation to the center of the screen. B. the projected image may be blurry or difficult to see, this is due to lack of Focus adjustment with the lens, please follow the processes below to adjust the Focus.
⑤ Multimedia Connection: A. Insert the USB flash driver into the USB port and choose the right signal source, then press Play / Pause button ( ) to display or stop.
► Multimedia File Specification Image Format Support File Extension JEPG, PNG, BMP .jpg / .png / .bmp Audio Format Support File Extension MPEG1, MPEG2, LPCM, MP3 .avi / .ts / .dat / .vob / .wmv / .mkv / .mp3 / .mp4 / .m4a Doesn’t Support : Dolby AC3 / AAC, DTS, WMA, DivX, VC1, RM, RMVB, FLV, etc Video Format ( Bit Rate up to 30~40 Mbs ) Support File Extension MPEG1, MPEG2, H.263, H.264, AVS, .dat / .ts / .mp4 / .mpg / .mpeg / .avi VC1, MJPEG, RV30, RV40, HEVC / .mkv / .mov / .asf / .flv / .3gp.
B. HDMI Connection Support most device with HDMI slot. Press "Source" on the remote control, then choose the right signal source “ HDMI “. Support the Devices which have HDMI Port ( Eg: Laptop. DVD Player, Computer , etc.
C. AV Connection Use AV cable for connecting as follows, choose the “AV” source input. D. Audio Out Connection User can connect the projector to an external speaker or headphones via headphone jack.
E.
F. Use Lighting Digital AV Adapter. Support iPhone, iPad, Choose Input Source “HDMI”.
► ACCESSORIES LIST While unpacking the package, please check and confirm all the accessories are accounted for. Note: Pictures only for your reference, different countries got different power plug, please contact your supplier for more details.
► WARRANTY CARD Thank you for purchasing our product ! Please read our warranty policy listed below: ① Projector by product Manual under normal working conditions for the use of, we provide you with a one-year warranty service. (Projector lamp is 6 months warranty) . ② The warranty period is from the date when you purchased our product. ③ Product warranty relating to the specific matters concerned, please contact dealers around.
Manual information All rights reserved. No part of this publication may be reproduced, distributed, or transmitted in any form or by any means, including photocopying, recording, or other electronic or mechanical methods, without the prior written permission of the publisher, except in the case of brief quotations embodied in critical reviews and certain other noncommercial uses permitted by copyright law. For permission requests at the address below. STREX SBD Trading B.V.
