User Manual

4
short-circuit influenced by environment temperature and humidity.
Please notice protection for the camera when using it outdoor.
♦ If the capacity of memory card is full, the camera will stop
recording automatically.
♦ Press the edge of the card gently to pop-up the memory card.
Basic Operation
Turn On And Off The Camera
Switch the Mode Button to“Test/On”to turn on the camera.After
power on, it will pop up the battery type selection interface: 1.5V
alkaline battery/3.7V lithium battery, press the up and down keys
to select the corresponding battery, press the OK button to
confirm.
Switch the Mode Button to “Off” to turn off the camera.
System Setup
Switch Mode Button to “Test”, then you can set the system
parameters.