User Manual

16
your installation location carefully for its suitability for the plugs.
The assembly material used must be suitable for the respective
location. If in doubt, consult a professional.
Install Steps
♦ Mark the drill holes by holding the foot of the wall bracket at the
desired mounting location and marking the hole positions.
♦ Use a drill with a 6 mm drill bit to drill the required holes and
insert the plugs and insert the wall plugs flush with the wall.
♦ Screw the wall bracket to the wall using the supplied screws .
♦ Mount the camera on the tripod screw and screw the camera a
little way on (about three turns).
♦ Turn the camera in the desired direction and lock it with the
lock nut .
♦ To move the camera into its final position, undo the two pivot
bolts a little, position the camera and fix the position by
tightening the two pivot bolts .