Installation Guide

©2020 VT Industries, Inc. All rights reserved.
All trademarks and registered trademarks are the property of their respective owners.
STEP 3 - SECURE COUNTERTOP
from VT Industries
™
from VT Industries
™
For additional information on installing your Stretta
countertop, please visit strettacountertops.com
Para obtener información adicional sobre cómo instalar
su tope Stretta, visite strettacountertops.com
To finish the exposed ends of the countertop and backsplash, please see the
easy-to-follow instructions included in the Stretta Endcap Kit.
CAUTION: Do not use screws that exceed the
combined thickness of the corner mounting
bracket and the thickness of the Stretta
countertop, otherwise you risk surface
penetration. (Figure 3-4)
cabinet corner
mounting brackets
cabinet corner
mounting brackets
Overhead View
BASE CABINET
(Figure 3-3)
(Figure 3-4)
STRETTA COUNTERTOP
CORNER
MOUNTING BRACKETS
BASE CABINET
WOOD SCREW
DO NOT DRILL PAST
3
Slide the countertops away from the
wall slightly to access the pockets on the
underside of the countertop. Drive the
three specialty screws into the pockets
using the specialty screw bit included in
the Stretta Installation Kit. Two screw
pockets are located on the bottom side
of the countertop (Figure 3-1) and
one is located on the back side of the
countertop. (Figure 3-2)
You can now attach your countertop
to the cabinets by driving screws (not
included) through the cabinet corner
mounting brackets into the countertop.
(Figure 3-3)
UNDERSIDE OF STRETTA
COUNTERTOP
BACKSIDE OF STRETTA
COUNTERTOP
UNDERSIDE OF STRETTA
COUNTERTOP
(Figure 3-2)(Figure 3-1)