Table Of Contents MX800 MX850 Congratulations on the purchase of your new motorized treadmill. To help ensure the enjoyable and trouble-free operation of your new treadmill, we strongly suggest you read this manual carefully and follow its recommendations. Important Safety Instruction ..............1 Preset Program .................................9 Assembly Instruction .........................2 Utilizattion .....................................12 CONSOLE OPERATION ..................4 Maintenance..
, Never use extension cords between the treadmill and wall outlet. Pls pay attention , the power cable need individual power source strictly , can not be usage mutual power supply with another equipment.
MX800/MX850 Since your treadmill is a heavy piece of equipment, we recommend that after taking off the top portion of the box, you slit the corners of the lower carton and fold down the sides. This will eliminate the need for you to pick up the treadmill over the sides of the box. Prior to starting the assembly process take all of the parts out of the box, remove all plastic bags, and lay them out on the floor to become familiar with the compoents.
MX800/MX850 Step 1: Handlebars assembly FIG-3 22 21 19 18 5 3 20 22 21 19 22 14 4 22 18 20 13 6 FIG-5 19 24 20 20 18 22 18 22 24 23 19 15 12 23 1. Flat the shipping box and take out packing material, Styrofoam, parts, screw bag and manual etc. from box.(FIG 1) 2. Remove screws/washers 18 19 20 22 from base frame and screws/washers 21 22 from Right/Left handle bar.(FIG 2) 3. Upright the completed support handles and handlebars.
MX800 Buttons and Windows Incline up: If the light under each button is flashing, it means to use that button for next setup process. Incline down: There are 1 LCD window and 3 LED windows. 1)WIN0(Incline) window: shows level of incline This will select program/level in setting mode before starting. This will increase the elevation in 1 increment. This will select program/level in setting mode before starting. This will decrease the elevation in 1 increment.
MX850 Buttons and Windows Incline up: If the light under each button is flashing, it means to use that button for next setup process. Incline down: There are 4 LED windows and 12 Alpha numeric display. This will select program/level in setting mode before starting. This will increase the elevation in 1 increment. This will select program/level in setting mode before starting. This will decrease the elevation in 1 increment. SPEED up: This will select program/level in setting mode before starting.
TFT-LCD TV Button function: Button POWER ON/OFF AV/TV CH+ CHVOL+ VOL - Function Press to power on or power off TV display. 1. Press to select TV/Video/MP3 Function. TV-AV-MP3 2. Hold for 3~4 seconds: enter into "MENU" to setup screen. 1. In TV mode: Press to select channel. 2. In MENU mode: Press to select item to set up. 1.In TV/Vedio/MP3 mode: Press to adjust volume. 2. In MENU mode: Press to adjust the value of each item.
MX800/MX850 Console of 3LED & 1LCD is with 1 Manual function, 12 preset programs, 1 H.R.C program, Body Mass and 2 user setting programs. Console of 4 LED & 12 character Alphanumeric LED is with 1 Manual function, 12 preset programs, 1 H.R.C program. Manual Function MX800: 1. Attach safety key and press "MODE" into selecting program mode. 2. Using speed arrow buttons to choose "Manual" function, then press "ENTER". 3. Time window is flashing.
MX800/MX850 TARGET HEART RATE PROGRAM: This program automatically modifies the speed and incline to maintain a preset target heart rate. This target is established in the setup process. The chart on this owners manual should be used to determine the appropriate target heart rate. To set up the target heart rate program, you will need to enter the workout time, your age, and your target heart rate.
MX800 SEGMENT LEVEL 2 3 4 2 3 4 2 3 4 3 4 5 3 4 5 3 4 5 4 5 6 4 5 6 4 5 6 3 4 5 3 4 5 3 4 5 2 3 4 2 3 4 2 3 4 3 4 5 3 4 5 3 4 5 3 4 5 3 4 5 3 4 5 2 3 4 2 3 4 3 4 5 3 4 5 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 3 4 5 3 4 5 3 4 5 4 5 6 4 5 6 4 5 6 5 6 7 5 6 7 5 6 7 6 7 8 6 7 8 6 7 8 7 8 9 7 8 9 7 8 8 8 6 8 9 9 9 7 9 10 10 10 8 6 7 8 6 7 8 4 5 6 4 5 6 4 5 6 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 2 3 4 4 5 6 4 5 6 4 5 6 6 7 8 6 7 8 6 8 8 8 7 7 9 9 9 8 8 10 10 10 9 7
MX850 SEGMENT LEVEL 2 3 4 2 3 4 3 4 5 3 4 5 4 5 6 4 5 6 4 5 6 3 4 5 3 4 5 3 4 5 2 3 4 2 3 4 2 3 4 3 4 5 3 4 5 3 4 5 3 2 3 4 2 3 4 3 4 5 3 4 5 4 5 6 4 5 6 5 6 7 5 6 7 6 7 8 6 7 8 7 8 9 7 8 9 1 2 LEVEL 4 2 3 4 4 5 6 4 5 6 4 5 6 6 7 8 6 7 8 6 8 8 8 7 7 9 9 9 8 8 10 10 10 9 LEVEL 1 2 3 1 2 3 3 4 5 3 4 5 6 7 8 6 7 8 6 7 8 7 8 9 1 2 1 2 7 8 7 8 7 8 2 2 2 2 2 9 9 9 2 2 10 10 10 3 3 2 3 3 2 3 9 3 4 9 3 4 9 4 5 2 4 5 2 4 5 2 3 4 1 P1 LEVEL 2 LEVEL
TFT-LCD TV SEGMENT LEVEL 1 P1 LEVEL 2 LEVEL 3 LEVEL 1 P2 LEVEL 2 LEVEL 3 LEVEL Speed Program 1 P3 LEVEL 2 LEVEL 3 LEVEL 1 P4 LEVEL 2 LEVEL 3 LEVEL 1 P5 LEVEL 2 LEVEL 3 LEVEL 1 P6 LEVEL 2 LEVEL 3 LEVEL 1 P7 LEVEL 2 LEVEL 3 LEVEL 1 P8 LEVEL 2 LEVEL 3 LEVEL Incline Program 1 P9 LEVEL 2 LEVEL 3 LEVEL 1 P10 LEVEL 2 LEVEL 3 LEVEL 1 P11 (5km) LEVEL 2 LEVEL 3 LEVEL 1 P12 LEVEL 2 (10km) LEVEL Speed Program: 3 1 2 3 4 2 3 4 2 3 4 1 2 3 1 2 3 2 3 4 2 3 4 2 3 4 1 2
situation.
on When you feel the noise of running belt is louder, please use silicone fluid spray on running belt. It is easy and quick. Before proceeding, ensure the treadmill power is off and unplugged. Fold up the treadmill to upright position. Loosen the running belt and then spray silicone on the inner side of running belt from both sides. Ensure spray entire running belt. Please see illustration. After spraying, please align the running belt and adjust the running belt tension. with . wrench # 6 right .
Step1 Step3 Step2 Horizontal Adjustment MX800 MX850 1. Please check all cable connection is well connected. 2. The treadmill did not move after pressing "Start" and show E1 , please check if there is any part stuck. 3. The treadmill run for few seconds after pressing "Start" but stops, please check if the sensor (near flywheel of front roller) is loose or defective. 4. Please check wires connected to motor are loose or not. 5. Please contact stores for service if E1 can not be solved.
