| bide aide: Life Span Owner's Manual Heart Rate Hast Strap For safe use and product knowledge please completely read this Product Owners Manet v, 1.0 Technical Specifications Battery type 1 XR2032 Operating temperature : 0-500 / 32-122 °F Precautions » You have allergic reason or skin irritation when you are using the sensors stop using it and consult the doctor » With moisture and abrasion, black printing on the surface of sensor might come off and stain your clothes I iris Sgt-colored.
Warranty The heart te sensor has one-year warranty from the date you purchase it, » The warranty does not cover the battery, damage due 10 misuse, abuse, accidents or non-compliance with the precautions; proper maintenance and elastic straps * The warranty does not cover any damage, losses, costs or expenses, directly or indirectly related to the product. » gems purchased second-handed are not covered within warranty, unless otherwise stipulated by local law.
registration go to www lifeSpanFitnesscon and select "Product Registration” Technical support Please log in fo our Life Span website at www ilifeSpanFithesscom/support, dick on “Customer Service” and complete the form to request assistance or call 877 654.3837 option 4 for 8 Customer Service Agent {please note that certain kinds of service should aly be performed by a qualified service technician). Heart rate sensor parts 1.
ale, 2. Adjust the length of the strap, so that you can wear it comfortably and it can be securely fastened right helot your chest. 3. Fasten the sensor with the connector on the strap. The Life Span logo of the sensor should be placed in a central and upright position. (fig 82) 4 Please moisten the electrode area and attach it fo your skin closely.
Ease detach the connector from the strap and rinse it under running water after every use and hang to dey. Sweat and moisture may keep the electrodes wist and the heart rate sensor will stay activated. This will reduce battery life. Getting started The heart rate sensor is compatible with the devices with Bluetooth 40/ANTS which sup-port heart rate measurement.
Connector © Detach the connector from the stags after every use and dry the connector with a soft towel, Clean the connector with a mild soap and water when needed. Never use alcohol or any thrasher material lex steed woo ar cleaning chemicals) Strap © Rinse the strap under running water after every use and hang to dry. Clean the strap gently with a mild soap and water when needed. Do not use moisturizing soaps, because residue will leave on the strap.
Battery Thee battery loved of your heart rate sensor can be displayed on the receiving device lf the APP has the function of showing battery status) to change the battery please follow the instruction below fig 1.Use a coin and turn the battery cover cotter-clockwise To“ A 2 insert a new battery(CR2032) with the positive poke facing the battery cover. Make sure the plastic sealing ring is right in the groove to ensure water resistance. 3.
federal Communication Commission Interference Statement This roentgen has been tested and found fo comply with the lines for a Class B digital device, pursuant fo Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference ne residential installation.
FOC Radiation Exposure Statement This sprinter complies with FOC RF radiation exposure: snits set forth for an uncontrolled environment This recipient should be installed snd operated with a minimum distance of 0.5 centimeters between the radiator and your body. This transmitter must not be collocated or operating in compunction with any other antenna or transmitter. The masters used for this transmitter must be installed fo provide a separation distance of at feast 0.
