Owners manual

5.
Placement of two sided tape on the Street Scene Splitter.
6.
With the help of another person place your splitter into postiion where the two sided tape is first. Then
where the 3 bosses are you will use the screws provided. Install two in the center boss and one in each
of the other two bosses. Use the #10 self tapping screw and on the other side use the tinnerman nut
to tighten.
7.
Now your ready to install fascia back onto the vehicle in reverse order as you took off.
PAGE 3
Tape Here Tape Here
Screw Here