Manualshelf

Owners manual

ManualsBrandsStreet Scene ManualsAir Deflectors, Wings & Spoilers950-70230 Front Splitter Fits 10-13 Camaro
123
2.
Next on the inside of the wheel well there will be 3 screws on each side. Use a Torx20 to remove. Then
pull open slpash guard open. There will be one 7MM bolt and 3 more 10MM bolts. You will have to reach
in to remove. See photos below NOTE: One of the screws is on each side of the blinker and the last one
is right below the head light.
3.
Slide off the front fascia but you will to un-plug the wires for the lights. See photo below.
4.
Now unplug the lights and place the front fascia on a soft cover bench. Hold the Street Scene Splitter in
place to see where it will be installed. You will need to clean with the 3M Promoter where the two sided
tape will be used. Both the Splitter and the bottom of fascia will need to be cleaned.
PAGE 2