SDS

ManualsBrandsStreamlight ManualsTools & Hardware61070 Buckmaster Camo Trident LED/Xenon Headlamp

Page 1 of 5

Kelprox

DeXXan

MATERIAL SAFETY DATA SHEET

DEXXAN

SERIES

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Trade name * DEXXAN

D502462 , A401804

Company

China

Information telephone no. * +(86) 769 8181036

Information fax no. * +(86) 769 8182590

Emergency telephone no. * +(86) 769 8181036

2. COMPOSITION/INFORMATION ON INGREDIENTS

Principal components * All Dexxan materials covered by this MSDS are

Styrene-ethylene/butylene-styrene block copolymer blends.

CAS Registry Numbers * Proprietary blends. Not identified by CAS number.

Main components : 66070-58-4 and 64742-52-5

Components presenting a

significant hazard * none

3. HAZARDS IDENTIFICATION

Risks * Dexxan materials covered by this MSDS are not

considered to be hazardous materials.

4. FIRST AID MEASURES

Routes of entry

Inhalation * Negligible hazard at ambient temperatures. Inhalation

of fine particles of dust may cause mild irritation.

Exposure to vapours released at high extrusion and

moulding temperatures may cause irritation to the

respiratory tract. If respiratory irritation occurs, remove

affected personnel from the work area into fresh air.

Obtain medical attention if irritation persists.

Ingestion * No known health hazard appears to be posed by the

ingestion of small amounts of TPE. A physician should

be consulted if large amounts are ingested.

Dexxan Polymer Solution Manufacturing Factory Limited,

Beihuang Road, Wujiachong Village, Zhongtang Town,

Dong Guan City, Guangdong Province,

Summary of content (5 pages)

PAGE 1
DeXXan Kelprox MATERIAL SAFETY DATA SHEET DEXXAN ® SERIES 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Trade name * Company DEXXAN ® D502462 , A401804 Dexxan Polymer Solution Manufacturing Factory Limited, Beihuang Road, Wujiachong Village, Zhongtang Town, Dong Guan City, Guangdong Province, China Information telephone no. * +(86) 769 8181036 Information fax no. * +(86) 769 8182590 Emergency telephone no. * +(86) 769 8181036 2.
PAGE 2
DeXXan Kelprox Eye contact * Irritation may result from the physical presence of any particles in the eye. Flush with plenty of clear water. Vapours produced during extrusion and moulding may cause slight eye irritation. Skin contact * Contact with molten alloy will burn unprotected skin. Cool immediately and obtain, if necessary, medical assistance. Do not remove molten product from burned skin. This should be done by a physician.
PAGE 3
DeXXan Kelprox 8. EXPOSURE CONTROLS/PERSONAL PROTECTION General measures * Provide local and general ventilation to ensure airborne dusts and process vapours remain below occupational exposure limits. Ventilation systems must be designed in accordance with applicable engineering standards. Cool molten waste material with water. Respiratory protection * No special precautions under normal conditions.
PAGE 4
DeXXan Kelprox Hazardous decomposition or byproducts * At processing temperature some degree of thermal degradation will occur. Although it is highly dependent on temperature and environmental conditions, traces of a variety of toxic and/or irritating gases can be released. Carcinogenity * not to be considered carcinogenic. Health hazards (acute and chronic) * not to be considered an acute or chronic health hazard. Signs and symptoms of exposure * Harmless at ambient temperatures.
PAGE 5
DeXXan Kelprox 16. OTHER INFORMATION Date of issue * January 2008 Dexxan Polymer Solution Manufacturing Factory Limited, Beihuang Road, Wujiachong Village, Zhongtang Town, Dong Guan City, Guangdong Province, China.