Installation Guide
Wi-Fi Troubleshooting
The Wi-Fi icon will indicate dierent connectivity status. See below for a guide on
how to interpret the Wi-Fi LED.
Amber, single-blinking pattern: The Control is in pairing mode and is waiting for a
smart phone or tablet to connect to it during the Wi-Fi setup process.
Amber, solid: A smart phone or tablet is currently connected to the Control.
The Control will play a short beeping tune when this connection is successfully
established.
Green, double-blinking pattern: The Control is attempting to pair to the Wi-Fi
network with the password that was given to it.
Green, triple-blinking pattern: The Control has connected to the Wi-Fi network and
is now attempting to reach the StreamLabs servers.
Green, single-blink once every 3-4 seconds: The Control has established a
connection to the StreamLabs servers via Wi-Fi and is now online.
If there is an error at any point during the connection or Wi-Fi setup process, the Wi-Fi
LED will revert to Amber and the error message will be displayed on the screen in the
StreamLabs app.