Installation Guide

Setup & Installation

Take note to install the Control device prior to any pipe branches. Branches prior

to the Control device will not be monitored or protected. At your installation

location, you must have access to an electrical outlet and a Wi-Fi signal. The

Control comes with a DC power adapter with a 10 foot cord. Power adapters of

additional lengths can be purchased from Streamlabswater.com.

Check your Wi-Fi strength at your installation location. If there is

an inadequate Wi-Fi signal:

a) Choose another location closer to your wireless router.

b) Relocate your wireless router closer to the installation.

c) Purchase a wireless extender to improve Wi-Fi coverage.

3. Shut o your incoming cold water line.

4. Drain your plumbing system.

Setup & Installation