Installation Guide

4
Installation Guidelines
Failure to comply with all aspects of these instructions
may result in unsafe performance.
All installations must comply with relevant State,
Provincial and Local Authority requirements.
Control unit can be installed vertically or horizontally.
If installing a Control with SharkBite connections on
copper pipe, use appropriate grounding clamps and run a
jumper wire across the unit.
Only use the provided StreamLabs DC Power Adapter.
The temporary bypass ow tube is for new construction
or maintenance applications of the Control.
Max pressure at max temperature: 200 psi at 105° F.
Control must be installed with correct ow direction as
indicated on the bottom of the unit.