User's Manual

AD Plus2.0 User Manual
Page 10 of 66
2.4. Preview
On the Preview screen, you can view the real-time recording, turn on/off the sound
or guide, and perform AI calibration.
2.4.1 Viewing Real-Time Recording
On the Preview screen, you can view the real-time recording of each channel of the
device. Double-tap on the preview screen of a channel to zoom in and double-tap
again to return to the normal screen. If the camera is damaged or not connected,
"VIDEO LOSS" will be displayed.
2.4.2 AI Calibration
ADAS automatic calibration is supported by AD Plus2.0. After the ADAS lens
installation height, left margin, front end width, and front end length are entered,
the equipment will be calibrated automatically. For detailed setting screen, refer to
Section 2.9.5. Here, the traditional method of ADAS algorithm calibration from the
preview interface and the calibration method of the external DMS camera lens
(optional) are introduced.
2.4.2.1 ADAS Calibration
① On the home screen, tap Preview. The Preview screen is displayed.
②
Tap AI Calibration on the lower left corner.
③
Tap ADAS for calibration.
④ Tap channel 1.
⑤ Tap Calibration.