User's Manual

AD Plus2.0 User Manual
Page 34 of 66
1. FaceCaptureEnable: enables face comparison after being selected.
2. DSM: allows you to set the threshold of the face comparison similarity. If the
similarity is greater than or equal to the set threshold, the two faces are
considered to be owned by the same driver.
3. Face capture method:

VehicleStartTriggerSnapshot: The device captures a snapshot when the
ACC is turned on from the off status, and the vehicle is moving at a
certain speed

TimedSnapshot: allows you to set the scheduled time to 60–3600
seconds, 300 seconds by default

GoBackCapture: The device captures a snapshot when the no driver
alarm is triggered until the alarm is cleared
2.7. Surveillance
2.7.1 Preview
The preview setting screen is mainly used for the display form on the externally
connected display, which supports single-screen and four-screen displays. The
channel to be displayed can be selected in a single-screen display. Click
Preferences > Surveillance > Live View, as shown in the following figure:
2.7.2. Recording