User's Manual

AD Plus2.0 User Manual
Page 56 of 66
Privacy mode voice-enable: it refers to whether the broadcast voice is enabled when
the privacy mode is triggered or touched. This enabling simultaneously controls the
voice of privacy mode on/off, which can not be controlled separately.
2.9.3. Advanced
On this screen, you can set G-Sensor alarm and Geo-fence alarm parameters. Tap
Preferences > Alarm > Advanced, as shown in the following figure:
On the Driver Behavior Alarm screen:
1. ACCEL2 is the name of the driver behavior alarm algorithm. If Enable is
selected for it, this algorithm is effective.
2. Alarm Type indicates the type of event triggered by intense driving behavior.
3. Trigger indicates the condition for triggering driving behavior alarms: The
alarm can be triggered by Harsh Braking, Hard Acceleration, Harsh Left
Turn, and Harsh Right Turn. Other parameters including Offset and Speed
can be configured, as shown in the following figure: