User's Manual

AD Plus2.0 User Manual
Page 33 of 66
each AP for simultaneous downloads on the platform.
Auto Download Reconnect, that is, when the vehicle returns to the station and
cannot connect to the service, it will restart and try to download again after
entering the sleep mode for a while. When the download tasks are full, or the
set AP reaches the upper limit, the platform will notify the device to enter sleep
mode, and at the same time tell the device how long to sleep before restarting
(that is, the sleep mode avoids wasting resources when queuing or waiting for
the upgrade).
Tick to enable Auto Download Reconnect and set the re-connection time
between 1 and 10 min, the default is 5 min.
2.6.7. Voice Setup
Choose Preferences > Basic Setup > Voice Setup to manually configure the
walkie-talkie volume and TTS voice. The range is 0 to 63, 55 by default. The screen
is as follows:
2.6.8. Face Compare
Tap Preferences > Basic Setup > Face Compare to set the driver face comparison
parameters. This function needs to be used with the FT Cloud platform. The screen
is as follows: