User's Manual

AD Plus2.0 User Manual
Page 50 of 66
2.8.2.3 Fixed-range Capture
The fixed-distance capture is supported, that is, capturing pictures at a fixed
distance and uploading them to the platform. Click Preferences > Collection >
Snap Setting > Distance Snap. The fixed-distance capture is disabled by default,
and the distance unit follows the system unit. The difference between the capture
linkage setting method and the timed capturing is that the fixed-distance capture
setting does not contain capturing time interval setting.
2.9. Alarm Setting
2.9.1. Base Alarm
On the Base screen, you can set IO Alarm, Speed Alarm, Panel Alarm, and GPS
Alarm.
Tap Preferences > Alarm > Base to enter the screen shown below.
The AD Plus2.0 supports conventional power boxes. If the power is supplied using
loose wires, 2 IO inputs are supported.
 IO Alarm screen:
1. No.: can be set to Sensor1, Sensor2,..., Sensor8 (there will be 8 IO inputs
only when the UPS power box is used);
2. OSD: Customizable, tap to modify
3. Abbreviation: can be set to the IO abbreviation configured in OSD