User's Manual

AD Plus2.0 User Manual
Page 49 of 66
1) Channel: Select the camera channel for capture.
2) Snap Enable: Select to enable timed capture for this channel.
3) Resolution: Select the capture resolution.
4) Quality: Select from 1 to 8. Value 1 (Best) indicates the best image quality.
5) Upload method: supporting FTP upload and HTTP upload. Captured pictures
can be automatically uploaded through FTP. See Section 2.6.6 for details on
FTP settings. When HTTP capture is selected, the captured pictures are
uploaded to the specified platform in HTTP mode. The HTTP parameter is
empty by default, and the HTTP address is issued through the platform.
6) Snap Numbers: Set it to 1, 2, or 3.
7) Interval: specifies the interval between each capture, unit: s
8) Copy: Well-defined parameters can be applied to other channels by this
button.
2.8.2.2 Capture at Alarm
Alarm-linked capture is supported, that is, capture starts once an alarm is triggered.
Tap Preferences > Collection > Snap Setting > Trigger Snap. The setting
method is the same as that for timed capture and is not described here.