User's Manual

AD Plus2.0 User Manual
Page 48 of 66
2.8.2. Capture Setting
2.8.2.1 Timed Capture
A time period can be specified to enable the device to capture images automatically.
Tap Preferences > Collection > Snap Setting > Time Snap. The Time Snap
screen is displayed, as shown in the following figure:
Select Enable to enable timed capture and tap Add to add a period for this function.
Start Time/End Time:
1) Set a time period, during which timed capture is enabled.
2) The period must be within a day.
3) A maximum of 8-time segments can be specified for timed capture.
4) You can add, edit, or modify the time periods.
Capture parameters can be specified for each time period independently. Tap the
icon to enter the Snap Link Set screen, as shown in the following figure: