User's Manual

Individual Log Report - SureTrac STRATEGIC Technologies Inc
42
iTRX Series Users Guide (STI) Feb 6, 2004
Individual Log Report - SureTrac Software
When a PRU+ calls the Central Computer (CC) the transferred information is stored in an Individual
Status Log on the CC. Each participant has a unique ID that is used to identify the participant. The
report will indicate all activity of the participant. The following events and description are typically
generated by Strategic’s SureTrac software.
The Events generated by the PRU+ are recorded as follows:
Events
Event Type Description
..info sch. call Info The PRU+ made a scheduled call
..info cc busy Info The PRU+ called the CC, but the line was busy
..info no dialtone Info The PRU+ attempted a call, but the line was off-hook
..info no connect Info The PRU+ dialled but did not connect to the CC
..info comm error Info The PRU+ connected to the CC but the call was
interrupted or terminated by excessive line noise
ALARM NO AC Alarm The PRU+ was disconnected from AC power
.cont no ac Cont Indicates a continuing disconnection from AC power
..info ac ok Clear AC power was restored to the PRU+
ALARM PRU+ CASE OPEN Alarm The PRU+ case has been opened or severely damaged.
.cont pru case open Cont Indicates a continuing tamper condition
..info pru case ok Clear The PRU+ case has been closed or corrected
ALARM TEL DISC Alarm The PRU+ was disconnected from the telephone line
..info tel conn Clear The PRU+ was reconnected to the telephone line
ALARM TAMPER/SEVER Alarm The PID strap has been completely cut or not reset
.cont tamper/sever Cont Indicates a continuing strap sever
..info tmp/sever ok Clear The strap circuitry has been reset with LOCK again
ALARM PROX/TAMPER Alarm The PID strap has been partially cut or tampered with
.cont prox/tamper Cont Indicates a continuing strap tamper
..info prox/tmp ok Clear The strap circuitry has been reset with a LOCK again
ALARM LOW PIU/PID BAT Info The PID battery is low or improperly installed
.cont low piu/pid bat Cont Indicates a continuing low pid battery
..info piu/pid batt ok Info The PID is indicating the low battery has been corrected
ALARM LOW PRU+ BATT Alarm The battery in the PRU+ is low. The PRU+ will stop
monitoring unless it is plugged into AC power.
.cont low pru batt Cont Indicates a continuing PRU+ low battery
..info pru batt ok Clear The PRU+ is indicating the low battery has been
corrected.
..info enter Info Non-Violation presence
..info leave Info Non-Violation absence
..info PRU+ Reset Info The PRU+ has been reset or turned on after total loss of
power