User's Manual

STRATEGIC Technologies Inc Quick Install
iTRX Series Users Guide (STI) Feb 6, 2004 33
Quick Install
The Quick Install feature enables the installer to easily setup the ACU / iTX set and have the ACU
determine if the setup is completed. The Quick Install feature is designed to prompt the installer for any
setup requirements that have not been met. Once all the criteria has been met the ACU will
automatically call into the Central Computer and pick up its final configuration settings.
The Quick Install will display different messages depending on what is still required. The ACU will scan
the list of requirements and prompt for the next one needed. The list is as follows:
1. AC is connected
2. ACU Case is closed
3. iTX has transmitted / iTX has been received by ACU
4. iTX has transmitted with a Strap Sever ok indication
5. iTX has transmitted with a Battery ok indication
6. Set Range
7. Telephone Line is present
Once these conditions have been met the ACU will indicate that everything is ok and will call the
Central Computer. If the ACU indicates “Call Successful” the installation is complete.